Receive emails from Total Solar Technologies on product Sales, Promotions, New Products, and Solar News that could save you $$hundreds of dollars.
Your information will not be sold or abused. (1-2 emails a month)
How did you hear about us?
What are you most interested in?


SKU : TSI-100024

Solar Max 6000

FREE SHIPPING anywhere in the continental U.S.!!

Cash or check preferred.  Credit Cards purchases will be charged a processing fee of 3.5%

Federal and State tax credits/deductions can pay for 50%-70% of the cost of the system.


The Solar Max 6000 is a heavy duty portable solar generator capable of powering most household appliances and home tools. The 6000 watt pure sine wave inverter is split phase capable at 110/220vac and is capable of an 18,000 watt surge for 20 seconds. (Scroll down for detailed inverter specifications).
As a pure sine wave inverter it's capable of powering computers, recharging lithium battery devices, running CPAP machines, professional audio/video equipment or tools with a variable speed capability and most everything* else at or less than 6000 watts like most fridges, freezers, TV's, furnace blower motors, some well pumps (*Read detailed inverter specification for amp. information)
This inverter is powered by six 12 volt 120 Amp hour AGM batteries connected in series to the 24 volt inverters.
Capable of providing 4.32 useable Kilowatt Hours (KWH).
This system comes with six 235 watt solar panels. (Twelve panels possible with upgrade packages)
Housed in a wood lined steel box attached to a heavy duty cart with a 1000 pound carrying capacity. The Solar Max 6000 more than packs in the power while still remaining portable.

Comes complete with:


  • 1 - 24 volt 6000 watt pure sine wave inverter 110/220 split phase
  • 1 - 24 volt 7 Amp battery charger for grid tied charging convenience
  • 1 - 60 Amp PWM 24 volt Solar Charge Controller (upgrade to 2 option)
  • 1 - digital voltage display to keep an eye on your battery level
  • 1 - 30 Amp RV plug (220 plug upgrade available, or both RV & 220)
  • 1 - 6 outlet power strip 15A/125V 1.875W, 4 standard outlets, 2 transformer outlets
  • 6 - 12v 120 Ah AGM batteries for 4.32 useable Kilowatt Hours 
           (Battery bank on wheels upgrade available)
  • 6 - 235 watt polycrystalline solar panels for 1410 watts of solar panel power   (more panels can be plugged in if a second charge controller upgrade is purchased)
  • 3 - 50 foot 2*x10AWG gauge *(positive & negative) UL4703 PV Wire to connect solar panel to system. One wire connects to two solar panels. Panels will need to be positioned side by side in pairs. (100 foot upgrade)
  • 1 - solid steel box, wood fitted interior for EMP resistance and rugged exterior for protection from wear and tear
  • 1 - Heavy duty cart with a 1000 lb load capacity can more than carry the           weight of the system (Weight: Approx. 600 Lbs.)
  • 1 - Manual packet with quick start guide and all component manuals
  • 1 year warranty
Scroll down for more detailed component specifications
Component features and specifications outlined below.

Split Phase Inverter 6000 watt Pure sine wave inverter

This split phase inverter is capable of producing 110/220vac. It will work virtually anywhere in the world, with the ability to auto detect 50 or 60 hz.

The built-in charger allows for you to use your existing grid power to maintain a charge on your batteries. It also includes an Auto-Gen start that will tell your Auto-Start Compatible generator to turn on and provide power for your secondary 24 volt charger.

This whole home power inverter is great for your emergency battery backup for when the grid goes down with an unnoticeable transfer time of 10 milliseconds, or for use as a standalone off-grid system. Kill your power bill and save the earth with this inverter charger. Use this inverter in your coach bus RV, large toy hauler or fifth wheel. It will provide you with plenty of power for your mobile home, boat house or yacht. No sense in dealing with noisy diesel engines when you can have quiet, efficient and free power provided by the sun.

No matter where you are on the globe, you can use this inverter charger. It will accept power from any grid system, on 50 or 60hz. If you're looking to keep the lights on and food fresh while the rest of the neighborhood is in the dark, look no further than the AIMS 6000 Watt Low Frequency Inverter. Prepare for the worst with the best.

Advantages of a Pure Sine Inverter:

  • Equipment runs more efficiently
  • Motors run cooler
  • Cleaner power
  • Ideal for power tool chargers, laser printers, electric shavers, microwaves, variable speed motors, TV's, medical equipment
  • 6000 watt low frequency inverter 110/220Vac Split Phase
  • 18000 watt surge for 20 seconds -3x surge capability
  • Battery Priority Selector
  • Terminal Block
  • GFCI
  • Marine Coated and Protected
  • Multi Stage Smart charger 90 Amp
  • remote panel available
  • auto gen start
  • auto frequency
  • 10msec typical transfer time
  • optional 25W power save mode
  • 8 battery charger settings

Inverter Output Specifications:

  • Continuous Output Power: 6000 Watts
  • Surge Rating: 18000 Watts (20 Seconds)
  • Output Waveform: Pure Sine/Same as input (Bypass Mode)
  • Nominal Efficiency: >88% (Peak)
  • Line Mode Efficiency: >95%
  • Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
  • Typical Transfer Time: 10ms (Max)
  • THD: < 10% DC

Input Specifications

  • Nominal Input Voltage: 24.0Vdc
  • Low Battery Alarm: 21.0Vdc-22.0Vdc
  • Low battery Trip: 20.0Vdc-21.0Vdc
  • High Voltage Alarm: 32.0Vdc
  • Low battery Voltage Restart: 31.0Vdc
  • Idle Consumption: <10 amps without power saver
  • Idle Consumption in Power Saver Mode: <<1 amps

Charger Specifications

  • Output voltage: Depends on battery Type
  • Charger Rate: 80A


  • Unit Weight: 79 lbs.
  • Unit Size L x W x H: 23.5 x 8.5 x 7.0 inches
  • Shipping Weight: 84 lbs.
  • Shipping L x W x H 30.5 x 14.5 x 13.75 inches

60 Amp Solar Charge Controller

Electrical specifications
Rated PV current  60 A
Charging / load current @ 77°F (25°C)  60 A
Voltage configurations  12 and 24 volts
Max. PV pen circuit array voltage  55 V
Max. voltage drop through controller  0.30 V
Total operating consumption  15 mA
Recommended NEC breaker size  60 A rated t 100% continuous duty
Recommended wire size  #6 AWG rated at 194°F (90°C)
Lead acid battery settings  Adjustable
NiCd battery settings  Adjustable
Load control mode  Low voltage reconnect - adjustable (sticker provided with unit)
Low voltage disconnect - user selectable manual or automatic reconnection -
(includes warning flash before disconnect and provides a one time, user selected grace period)

General specifications
Power consumption, night time  3 mA
Enclosur material  Indoor, ventilated, powder coated steel with 2 cm and 2.5 cm knockouts
Product weight  3.1 lb (1.4 kg)
Product dimensions (H x W x D) 10.0 x 5.0 x 2.5 in (25.4 x 12.7 x 6.4 cm)
Ambient air temperature for operation 32°F to 104°F (0°C to 40°C)
Operating altitude 15000 ft (4572 m)
Non-operating altitude 50000 ft (15240 m)
Warranty Two-year standard
Part number C60

Display type Multi color LED indicates the operating and battery voltage status
Regulation method Solid state, three-stage (bulk, absorption, and float), pulse width modulation
Field adjustable control setpoints Two user adjustable voltage setpoints for control of loads or charging sources –
settings retained if battery is disconnected
Equalization charge User selectable manual or automatic equalization – every 30 days

Regulatory approval
Safety UL listed to UL1741* and CSA 107.1-01; CE Marked for the Low Voltage Directive
EMC FCC and Industry Canada Class B, CE Marked for the EMC Directive

7 Amp Battery charger

Model JAC0724
AC Input Voltage 100 - 220 ± 10% Autosensing
Input Frequency 50/60 Hz
DC Output Current 7 Amp
DC Output Equal. Voltage 28.7 ± 0.2V
DC Output Float Voltage 26.9 ± 0.2V
Battery Application Lead Acid Battery

12 Volt 120 Ah AGM batteries

Battery specifications: Centennial CB12-120S (12V118.6Ah)

Cells Per Battery 6
Voltage Per Battery 12
Capacity 115Ah @ 10 hr-rate to 1.80V per cell
118.6Ah @ 20 hr-rate to 1.75V per cell
Weight Approx. 68.78 Lbs/31.2 Kg (Tolerance +/- 2 %)
Dimensions 12.99" (Length) x 6.77" (Width) x 9.51" (High)
330mm (Length) x 172mm (Width) x 241.5mm (High)
Max. Discharge Current 1150A (5 sec)
Internal Resistance Approx. 4.2 m
Operating Temperature Range Discharge: -4°F ~ 140°F / -20°C ~ 60°C
Charge:     32°F ~ 122°F / 0°C ~ 50°C
Storage:    -4°F ~ 140°F / -20°C ~ 60°C
Normal Operating Temperature Range  77°F ± 9°F / 25°C ± 5°C
Float charging Voltage  13.6 TO 13.8 VDC / battery Average at 77°F / 25°C
Recommended Maximum Charging
Equalization and Cycle Service 14.6 to 14.8 VDC/battery Average at 77°F / 25°C
Self Discharge (How quickly the stored energy will deplete when not in use) CB Valve Regulated Lead Acid (VRLA) batteries can be stored for more than 6 months at 77°F / 25°C. Self-discharge ratio less than 3% per month at 77°F / 25°C. Please charge batteries before using.

Solar panels



Model No. CS6P-235PX


Power Warranty 25 Years of 80% Output Power
Product Warranty 10 Years

ELECTRICAL DATA AT STC (Standard Test Conditions)

Maximum Power (Pmax)  235 W
Voltage at Maximum Power (Vmpp)  29.8 V
Current at Maximum Power (Impp)  7.90 A
Open Circuit Voltage (Voc)  36.9 V
Short Circuit Current (Isc)  8.46 A
Panel Efficiency  14.61 %
Power Tolerance (Positive)  0 ~ + 5 W
*Standard Test Conditions (STC): air mass AM 1.5, irradiance 1000W/m2, cell temperature 25°C

ELECTRICAL DATA AT NOCT (Nominal Operating Cell Temperature)

Maximum Power (Pmax)  170 W
Voltage at Maximum Power (Vmpp)  27.2 V
Current at Maximum Power (Impp)  6.27 A
Open Circuit Voltage (Voc)  33.9 V
Short Circuit Current (Isc)  6.86 A
Temperature  113 °F ± 3.6 °F / 45 ± 2 °C
Nominal Operating Cell Temperature (NOCT): 800W/m2, AM 1.5, windspeed 1m/s,ambient temperature 20°C


Operating Temperature Range  -40 °F ~ 185 °F / -40 ~ 85 °C
Temperature Coefficient of Pmax  -0.45 %/°C
Temperature Coefficient of Voc  -0.33 %/°C
Temperature Coefficient of Isc  0.06 %/°C


Maximum System Voltage  600 V
Series Fuse Rating  15 A


Panel Dimension (H/W/D)  64 1/2" x 38 5/8" x 1 9/16"  (1642 x 994 x 40mm) 
Weight   44.1 lbs                            (20 kg)                  
Cell Type  Polycrystalline
Cell Size  6 1/8" x 6 1/8"                    (156 ×156mm)        
Cell Number  60
Glass Type  Tempered, Anti-reflection Coating
Glass Thickness  3.2 mm
Encapsulant Type  EVA
Back Cover Type  TPT
Frame Type  Anodized Aluminium Alloy
Junction Box Diodes  3
Junction Box Protection Class  IP 65
Connector Type  MC4
Cable Crosssection  4 mm2
Cable Length  39.37"                                 (1000mm)

Solar panel cables


  • Photo voltaic (PV) wire
  • 10 AWG Double strand
  • 50 feet in length (custom lengths at 5 feet intervals of length can be made to order from 10 to 100 feet)
  • UL4703
  • Operates in temperatures from -40°F TO 257°F  Wet or Dry /   (-40°C - 125°C)
  • Sun resistant
  • 600V

The Solar Max 6000 provides silent, safe, substantial power for your RV, trailer or cabin to save gas & generator life. With this system you can truly become long term self-sufficient. This is literally a small house/cabin system on wheels capable of expanding by being able to easily connect more batteries and solar panels.

Optional extras

220V Outlet (Option A)
Price: $100
Click here for Option A page

1 - 220 volt 30 amp outlet. Allows you to plug 220V devices into the unit without having to wire directly into the inverter.


Solar Max 6000 Dual Plug Upgrade (Option B)

Solar Max 6000 ONLY UPGRADE!
Price: $200
Click here for Option B page
This upgrade lets you have both 30 Amp RV outlet (110V) and the 30 Amp 220V outlet.

Solar Max 6000 - Battery Bank Expansion Connector (Option C)

Price: $100
Click here for Option C page
Quick Connect (Anderson) connector for the SOLAR MAX 6000. Allows you to plug the Battery Bank on Wheels into the Solar Max 6000 without having to wire directly into the power box.


Solar Max 6000 second Solar Charge Controller and plugs (Option D)

Expand your Solar Max 6000 to capacity of 12 solar panels by adding another 60 amp solar charge controller to bring the total number of watts from 6 solar panels at 1410 watts up to 12 solar panels at 2820 watts. (Upgrade limited to the 6000 system)

This expansion includes:

  • (1) extra 60 amp PWM Schneider Solar Charge Controller. (for a total of 2 charge controllers)
  • extra Solar Panel plug-ins

All pre-wired, plug n play, ready to add 6 more solar panels to your unit.

(Note: Additional panels will have to be purchased in addition to the charge controller upgrade to raise the level of watts to above 1410.)

Price: $425
Click here for Option D page

Solar Max 6000 Option E

(All of the above upgrades for less than the cost of them individually)

IMPORTANT:  THIS DOES NOT INCLUDE SOLAR PANELS OR BATTERY BANK. This factory installed kit enables your 6000 unit so that at a later time 6 more solar panels and a battery bank can just be plugged in. 

This deluxe expansion includes:

  • (1) extra 60 amp PWM Schneider Solar Charge Controller. (for a total of 2 charge controllers)
  • extra Solar Panel plug ins. (for a total of 12 solar panel plugs)
  • 30 amp RV plug  and a 30 amp 220v plug
  • battery bank quick connect connector

All wired, plug 'n' play, ready to add 6 more solar panels to your unit or a battery bank on wheels to your unit.

Price: $685
Click here for the Option E page



Solar Panel stand

Price: $83.95 
Click here to go to product page

HEAVY DUTY STEEL, WHEELED, EASY ADJUSTABLE CART.. Easy assembly, easy attachment to any full size solar panel. (Simply drill 6 holes in solar panel frame.)   This stand is adjustable for angles from 30 degrees to 60 degrees.  (to adjust for position of the sun)

Solar Panels

ADD 1, 2, or 3 additional 235 watt solar panels

Buy now to save on shipping later.
Price: $210 for each additional solar panel

Click here to go to product page


2 for $500

Note: As the Solar Max 6000 is a 24 volt system, 24 volts of battery power is required. This means two 12 volt batteries will be required as one will not work. Extra batteries can be plugged in outside of the box however this will reduce the portability of your unit.
Click here for more details

Solar panel wire 100 foot length from 50 foot

Price: $78.95 per cable
Click here to go to product page
Cable specifications

  • Photo voltaic (PV) wire
  • 10 AWG Double strand
  • 100 feet in length (custom lengths at 5 foot intervals of length can be made to order from 10 to 100 feet)
  • UL4703
  • Operates in temperatures from -40°F TO 257°F  Wet or Dry /   (-40°C - 125°C)
  • Sun resistant
  • 600V

Nano coating for solar panels

Price for 1 panel: $34.95
Click here for product page

Price for 2 + panels: $30.95 (per panel cost)
Click here for product page

Make your solar panels 10%--35% more efficient

Solar panels with the patented PLT Enhancement treatment -- have been shown to produce 10%--35% more energy than untreated panels. Average energy improvement within 24 hrs of treatment is 13%. After 6 months energy improvement increases up to 35%.

  • Make more energy...better return on your investment ◦ ​(For example, 10 panels at 240watts ea, 2400 watts combined, at just a 25% improved efficiency would produce 600 more watts every hour.)
  • Save $$ on cleaning costs...(50%--75+%)
  • 20 year warranty!
  • Not only does the treatment produce more energy from your panels, but it also helps clear atmospheric pollution. ​Things like Carbon Monoxide, Benzene, Nitrogen Dioxide, Hydrocarbons, smog, etc.)
  • Pays for itself often in less than a year. (Depending on how dirty an environment your panels are in and/or how much sun they get.)

HOW DOES IT WORK: The treatment uses two specialized formulas (one is patented and the other is proprietary) to permanently bond a nano thin layer of Enhanced Titanium Dioxide Nano Particles to the surface of the solar panel. This layer of Titanium Dioxide particles, when exposed to the sun, helps the solar panel absorb photons from the sun, immediately increasing it's efficiency up to 13%. Additionally, the photocatalytic action of the patented TiO2 formula eliminates static electricity from the surface of the panel. This has two effects: First, it is static electricity that attracts and holds dust, dirt, oil, pollution, etc. to the panels glass surface. With no static electricity... the panel stays cleaner longer. Secondly, when water hits the panel, the photocatalytic action eliminates the surface tension of the water droplet. Water surface tension & static electricity is what holds the water to the panel. With no attraction, water just flows off quickly and easily, carrying "gravity held" dirt and pollution along with it. This action is called "hydrophilic" as opposed to the normal "hydrophobic" beading/sticking action of water. (For more information on the patented TiO2 formulations and how they work, go to www.PURE-LIGHT.COM)

Contact our team for customized design expansions:
Phone: 208-745-7100