Cash or check preferred. Credit Cards purchases will be charged a processing fee of 3.5%
Federal and State tax credits/deductions can pay for 50%-70% of the cost of the system. http://www.dsireusa.org/
Split Phase 110v/220v 6000 watt Pure sine wave inverter
This split phase inverter is capable of producing 110/220vac. It will work virtually anywhere in the world, with the ability to auto detect 50 or 60 hz.
The built-in charger allows for you to use your existing grid power to maintain a charge on your batteries. It also includes an Auto-Gen start that will tell your Auto-Start Compatible generator to turn on and provide power for your secondary 24 volt charger.
This whole home power inverter is great for your emergency battery backup for when the grid goes down with an unnoticeable transfer time of 10 milliseconds, or for use as a standalone off-grid system. Kill your power bill and save the earth with this inverter charger. Use this inverter in your coach bus RV, large toy hauler or fifth wheel. It will provide you with plenty of power for your mobile home, boat house or yacht. No sense in dealing with noisy diesel engines when you can have quiet, efficient and free power provided by the sun.
No matter where you are on the globe, you can use this inverter charger. It will accept power from any grid system, on 50 or 60hz. If you're looking to keep the lights on and food fresh while the rest of the neighborhood is in the dark, look no further than the AIMS 6000 Watt Low Frequency Inverter. Prepare for the worst with the best.
Advantages of a Pure Sine Inverter:
Inverter Output Specifications:
10 Yr Manufacturer Defect.
75 Amp Lithium Battery charger
AC Converter / Battery Charger 12V & 24V Smart Charger 75 Amps - Listed to UL 458/CSA
Input voltage 96-145V,
output current 75A for 12V mode
output current 37.5A for 24V mode
Input voltage 70-96V,
output current 37.5A for 12V mode
output current 18.75A for 24V mode
Output over voltage
The battery temperature sensor allows the charge controller to
continuously adjust charge voltage / charge current based on actual battery temperature.
When the battery temperature is over 40 °C, unit will reduce the charging voltage to Float voltage, also it will reduce the Max charging current by 10% with every two degree of temperature rise.
When the battery temperature is over 50 °C, unit will shut down.
Nominal ambient temperature: 25°C
Operating Ambient Temperature range: -10°C to 40°C
(On the heat sink of DC-DC part, if the temperature is over 90 ℃, the Charger Current will be de-rate to 50% ; if the temperature is over 105 ℃, the Unit will be shut down.)
Note: Solar Panels will very from 250 Watts to 300 watts and could be Polycrystaline or Monocrystaline depending on current market pricing and availability. Check with support for current panels.
Solar panel cables
Click here for Option C page
Quick Connect (Anderson) connector for the SOLAR MAX 6000. Allows you to plug the Battery Bank on Wheels into the Solar Max 6000 without having to wire directly into the power box.
Click here to go to product page
HEAVY DUTY STEEL, WHEELED, EASY ADJUSTABLE CART.. Easy assembly, easy attachment to any full size solar panel. (Simply drill 6 holes in solar panel frame.) This stand is adjustable for angles from 30 degrees to 60 degrees. (to adjust for position of the sun)
Price: $78.95 per cable
Click here to go to product page
Make your solar panels 10%--35% more efficient
Solar panels with the patented PLT Enhancement treatment -- have been shown to produce 10%--35% more energy than untreated panels. Average energy improvement within 24 hrs of treatment is 13%. After 6 months energy improvement increases up to 35%.
HOW DOES IT WORK: The treatment uses two specialized formulas (one is patented and the other is proprietary) to permanently bond a nano thin layer of Enhanced Titanium Dioxide Nano Particles to the surface of the solar panel. This layer of Titanium Dioxide particles, when exposed to the sun, helps the solar panel absorb photons from the sun, immediately increasing it's efficiency up to 13%. Additionally, the photocatalytic action of the patented TiO2 formula eliminates static electricity from the surface of the panel. This has two effects: First, it is static electricity that attracts and holds dust, dirt, oil, pollution, etc. to the panels glass surface. With no static electricity... the panel stays cleaner longer. Secondly, when water hits the panel, the photocatalytic action eliminates the surface tension of the water droplet. Water surface tension & static electricity is what holds the water to the panel. With no attraction, water just flows off quickly and easily, carrying "gravity held" dirt and pollution along with it. This action is called "hydrophilic" as opposed to the normal "hydrophobic" beading/sticking action of water. (For more information on the patented TiO2 formulations and how they work, go to www.PURE-LIGHT.COM)