SOLAR MAXX 6,000 --10/12-- EXPANDED-LITHIUM
**Plug 'N' Play Portable Excellence**
GET MORE "POWER" FOR YOUR MONEY WITH LITHIUM! Top of the line, Super Safe, LiFePO4 LIthium increases the life of the batteries by up to 8 times with double the available power, faster recharge rates, lighter weight. 
Flat Rate Shipping of $500 anywhere in the continental U.S.
Cash or check preferred. Credit Cards purchases will be charged a processing fee of 3.5%
Federal and State tax credits/deductions can pay for 50%-70% of the cost of the system. http://www.dsireusa.org/
Overview
The Solar Maxx 6,000-10/12 Expanded Lithium is an incredible buy. A heavy duty portable solar generator capable of powering most household appliances and home tools. The 6,000 watt pure sine wave inverter is split phase capable at 110/220vac and is capable of an 18,000 watt surge for 20 seconds. (Scroll down for detailed inverter specifications).
As a pure sine wave inverter it's capable of powering computers, recharging lithium battery devices, running CPAP machines, professional audio/video equipment or tools with a variable speed capability and most everything* else at or less than 6000 watts like most fridges, freezers, TV's, furnace blower motors, some well pumps (*Read detailed inverter specification for amp. information).png)
This inverter is powered by TEN (10) 12 volt 100 Amp hour Lithium LiFePo4 batteries connected in series to the 24 volt inverter. Capable of providing over 10,000 watts (10k) useable Kilowatt Hours (KWH).
This system comes with twelve 250 watt (or larger) solar panels for 3000 watts of "full sun" power per hour. (That is an amazing 18,000 watts per 6 hr avg day and 540 kw per 30 day month). This could power a small house or cabin.
Housed in a heavy duty steel box attached with all terrain pnuematic tires with a 1000 pound carrying capacity, but only weighing 350 lbs, The Solar Max 6000-10/12 expanded Lithium more than packs in the power while still remaining portable.
Comes complete with:
- 1 - 24 volt 6000 watt pure sine wave inverter 110/220 split phase
- 10 x 12V 100Ah LiFePO4 Batteries
- 2 x 60 Amp MPPT Solar Charge Controllers
- 1 x Lithium Battery Charger for grid tied charging convenience
- 1 - 30 Amp RV plug
- 1 - 30 Amp 220 plug
- 1 - 6 outlet power strip 15A/125V 1.875W, 4 standard outlets, 2 transformer outlets
- 12 - 250 watt polycrystalline solar panels for 3000 watts of solar energy PER HOUR of Direct/Full Sun.
- 6 - 50 foot 2*x10AWG gauge *(positive & negative) UL4703 PV Wire to connect solar panel to system. One wire connects to two solar panels. Panels will need to be positioned side by side in pairs. (100 foot upgrade)
- 1 - Heavy duty steel cart with 10" all terrain pneumatic wheels with a 1000 lb load capacity can more than carry the weight of the system (Weight: Approx. 350 Lbs.)
- 1 - Manual packet with quick start guide and all component manuals
- 10 year warranty on batteries, 25 year performance warranty on solar panels, 3 year warranty on electronics.
Scroll down for more detailed component specifications
NOTE: OPTIONAL UPGRADES
Call for current pricing & Sales:
- Change the 50 ft solar cables to 100 ft solar cables
- Add 2 more Lithium Batteries for only $1,728 (for a total of 8 batteries, 9600 usable Watts of power)
- Add another Lithium battery box on Wheels with 6-8 more Lithium Batteries & Solar Charge Controllers that can connect into the BASE 6000 Lithium system.
- Add "Lid Closed" operation option.
- Add "EMP Resistance" option.
Component features and specifications outlined below.
Split Phase 110v/220v 6000 watt Pure sine wave inverter
This split phase inverter is capable of producing 110/220vac. It will work virtually anywhere in the world, with the ability to auto detect 50 or 60 hz.
The built-in charger allows for you to use your existing grid power to maintain a charge on your batteries. It also includes an Auto-Gen start that will tell your Auto-Start Compatible generator to turn on and provide power for your secondary 24 volt charger.
This whole home power inverter is great for your emergency battery backup for when the grid goes down with an unnoticeable transfer time of 10 milliseconds, or for use as a standalone off-grid system. Kill your power bill and save the earth with this inverter charger. Use this inverter in your coach bus RV, large toy hauler or fifth wheel. It will provide you with plenty of power for your mobile home, boat house or yacht. No sense in dealing with noisy diesel engines when you can have quiet, efficient and free power provided by the sun.
No matter where you are on the globe, you can use this inverter charger. It will accept power from any grid system, on 50 or 60hz. If you're looking to keep the lights on and food fresh while the rest of the neighborhood is in the dark, look no further than the AIMS 6000 Watt Low Frequency Inverter. Prepare for the worst with the best.

Advantages of a Pure Sine Inverter:
- Equipment runs more efficiently
- Motors run cooler
- Cleaner power
- Ideal for power tool chargers, laser printers, electric shavers, microwaves, variable speed motors, TV's, medical equipment
Features
- 6000 watt low frequency inverter 110/220Vac Split Phase
- 18000 watt surge for 20 seconds -3x surge capability
- Battery Priority Selector
- Terminal Block
- GFCI
- Marine Coated and Protected
- Multi Stage Smart charger 90 Amp
- remote panel available
- auto gen start
- auto frequency
- 10msec typical transfer time
- optional 25W power save mode
- 8 battery charger settings
Inverter Output Specifications:
- Continuous Output Power: 6000 Watts
- Surge Rating: 18000 Watts (20 Seconds)
- Output Waveform: Pure Sine/Same as input (Bypass Mode)
- Nominal Efficiency: >88% (Peak)
- Line Mode Efficiency: >95%
- Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
- Typical Transfer Time: 10ms (Max)
- THD: < 10% DC
Input Specifications
- Nominal Input Voltage: 24.0Vdc
- Low Battery Alarm: 21.0Vdc-22.0Vdc
- Low battery Trip: 20.0Vdc-21.0Vdc
- High Voltage Alarm: 32.0Vdc
- Low battery Voltage Restart: 31.0Vdc
- Idle Consumption: <10 amps without power saver
- Idle Consumption in Power Saver Mode: <<1 amps
Charger Specifications
- Output voltage: Depends on battery Type
- Charger Rate: 80A
Dimensions
- Unit Weight: 79 lbs.
- Unit Size L x W x H: 23.5 x 8.5 x 7.0 inches
- Shipping Weight: 84 lbs.
- Shipping L x W x H 30.5 x 14.5 x 13.75 inches
General specifications
Power consumption, night time |
3 mA |
Enclosur material |
Indoor, ventilated, powder coated steel with 2 cm and 2.5 cm knockouts |
Product weight |
3.1 lb (1.4 kg) |
Product dimensions (H x W x D) |
10.0 x 5.0 x 2.5 in (25.4 x 12.7 x 6.4 cm) |
Ambient air temperature for operation |
32°F to 104°F (0°C to 40°C) |
Operating altitude |
15000 ft (4572 m) |
Non-operating altitude |
50000 ft (15240 m) |
Warranty |
Two-year standard |
Part number |
C60 |
Features
Display type |
Multi color LED indicates the operating and battery voltage status |
Regulation method |
Solid state, three-stage (bulk, absorption, and float), pulse width modulation |
Field adjustable control setpoints |
Two user adjustable voltage setpoints for control of loads or charging sources –
settings retained if battery is disconnected |
Equalization charge |
User selectable manual or automatic equalization – every 30 days |
Regulatory approval
Safety |
UL listed to UL1741* and CSA 107.1-01; CE Marked for the Low Voltage Directive |
EMC |
FCC and Industry Canada Class B, CE Marked for the EMC Directive |
Lithium Battery 12V 100Ah LiFePO4 Lithium Iron Phosphate
Electrical Specifications |
LFP12V100A |
Nominal Voltage |
12.8V |
Nominal Capacity (at .5C, 77°F) |
100Ah |
Minimum Capacity (at .5C, 77°F) |
95Ah |
Expected Cycle Life |
>4000 cycles w/1C charge and discharge rate, at 77°F, 80% DOD |
Operating Specifications |
|
Charge Method |
Smart charger, constant current, constant voltage |
Charge Voltage Range (Max 14.6V) |
14.4 -14.6V |
Continuous Charge Current |
100A Max |
Charge Temperature |
32° F to 113° F |
Continuous Discharge Current |
100A Max |
Peak Instant Discharge Current (10 secs) |
200A |
Over Voltage Shutdown |
15.6 +/-.2V |
Discharge Cut-off Voltage |
8V =/- .5V |
Discharge Temperature |
-4° F to 149° F |
Storage Temperature |
-4° F to 113° F |
Self Disharge (stored at 50% SOC) |
< 3%/month |
Watt hours |
1200 watt hours |
Physical Specifications |
|
Battery Dimensions |
12.75″L x 6.5″W x 8.75″H |
Weight |
30.2 lb |
Shipping Weight |
32 lb |
Group Size |
31 |
Battery post size |
5/16″ |
BMS Operation |
|
Over Charge Protection |
Over charge detection voltage: 3.9 +/- .05V |
Over charge detection delay time: .96 – 1.4s |
Over charge release voltage: 3.80 +/-.05V |
Maximum charge voltage: 3.65 +/-.05V |
Over Discharge Protection |
Over discharge detection voltage: 2.0V +/- .05V |
Over discharge detection delay time: 115-173ms |
Over discharge release voltage: 2.3V +/- .10V |
Over Current Protection |
Over current detection delay time: 9 +/- 2ms |
Over current release condition: Cut load |
Polarity Reverse Protection |
Yes |
Short Circuit Protection |
Yes |
UPC |
840271004587 |
Warranty |
10 Yr Manufacturer Defect.
|
75 Amp Lithium Battery charger
AC Converter / Battery Charger 12V & 24V Smart Charger 75 Amps - Listed to UL 458/CSA
Input Voltage |
96-145VAC full performance |
|
70-96VAC automatically de-rate to 50% of full load current |
Frequency |
40Hz to 70Hz |
Nominal Input Current at Rated Output |
<9Aac |
Voltage Measurement Accuracy |
±8Vac |
Frequency Measurement Accuracy |
±1Hz |
Output |
|
Nominal Voltage |
12/24Vdc manual adjustable |
Output Current |
Input voltage 96-145V,
output current 75A for 12V mode
output current 37.5A for 24V mode
|
|
Input voltage 70-96V,
output current 37.5A for 12V mode
output current 18.75A for 24V mode
|
Rated Output Current |
Manual adjustable |
Current Accuracy |
± 6% of full rated output current @25°C, for target currents across the range from 10% rated output (for absorption exit criteria accuracy) to the current limit setpoint. |
Load Regulation |
1.5% |
Current Limit |
75-80Amp |
Dead-Battery Charging |
8-14.9Vdc at 100% of rated output current |
|
8-29.8Vdc at 100% of rated output current |
Selectable Battery Type |
Open Lead-Acid, Gel, AGM, LiFePo4, adjustable |
Parallel Outputs |
Maximum of two AC converter units connected in parallel |
Efficiency |
80% |
Protection |
|
Input Over Voltage |
Unit must be safe for input voltage up to 150VacRMS (and up to 215Vpeak), need not be operating. Above this level the unit may be damaged. |
Reverse Battery Polarity Protection |
Non-destructive reverse battery polarity protection with fuses. Unit shall not sustain damage and shall meet all specifications after fuse replacement. |
Input Under-voltage |
Unit must not be damaged for all input voltages from 0-300Vac. Shutdown or input current limit or other means may be applied when input voltage is out of normal operating range. |
Output over voltage
12/24V mode
|
12Vdc. Unit will shut down if Vcharging > Vcharging (target) + 1.0Vdc for more than 2 seconds; unit will restart when voltage <= Vcharging (target) for more than 2 seconds.
For battery OVP the unit will restart in the same stage. |
|
24Vdc. Unit will shut down if Vcharging > Vcharging (target) + 1.5Vdc for more than 2 seconds; unit will restart when voltage <= Vcharging (target) for more than 2 seconds.
For battery OVP the unit will restart in the same stage. |
Charger over temperature protection |
The internal temperatures of the charger will be measured by NTC. Based on these measurements, unit will shut down if the temperature exceeds 105°C. Unit will restart when environment temperature cools to 95 °C. |
BTS(Battery Temperature Sensing) |
The battery temperature sensor allows the charge controller to
continuously adjust charge voltage / charge current based on actual battery temperature.
When the battery temperature is over 40 °C, unit will reduce the charging voltage to Float voltage, also it will reduce the Max charging current by 10% with every two degree of temperature rise.
When the battery temperature is over 50 °C, unit will shut down.
|
Environmental |
|
Operation temperature |
Nominal ambient temperature: 25°C
Operating Ambient Temperature range: -10°C to 40°C
(On the heat sink of DC-DC part, if the temperature is over 90 ℃, the Charger Current will be de-rate to 50% ; if the temperature is over 105 ℃, the Unit will be shut down.)
|
Relative humidity |
5~95% without condensation |
Noise |
Unit requirements: below 50dB (A) measured at 1 m distance with fan full working. |
Storage Conditions Temperature |
-20°C to +80°C |
Cooling |
Smart fan control |
Safety |
UL458,CSA22.2#107.1 |
Mechanical |
|
Dimension (D x W x H) mm |
10.25” * 6.75” * 3.25” |
Unit Weight |
6.5 lb |
Boxed Weight |
7 lb |
Solar panels
Note: Solar Panels will very from 250 Watts to 300 watts and could be Polycrystaline or Monocrystaline depending on current market pricing and availability. Check with support for current panels.

Specifications
WARRANTY
Power Warranty |
25 Years of 80% Output Power |
Product Warranty |
10 Years |
ELECTRICAL DATA AT STC (Standard Test Conditions)
Maximum Power (Pmax) |
235 W |
Voltage at Maximum Power (Vmpp) |
29.8 V |
Current at Maximum Power (Impp) |
7.90 A |
Open Circuit Voltage (Voc) |
36.9 V |
Short Circuit Current (Isc) |
8.46 A |
Panel Efficiency |
14.61 % |
Power Tolerance (Positive) |
0 ~ + 5 W |
*Standard Test Conditions (STC): air mass AM 1.5, irradiance 1000W/m2, cell temperature 25°C
ELECTRICAL DATA AT NOCT (Nominal Operating Cell Temperature)
Maximum Power (Pmax) |
170 W |
Voltage at Maximum Power (Vmpp) |
27.2 V |
Current at Maximum Power (Impp) |
6.27 A |
Open Circuit Voltage (Voc) |
33.9 V |
Short Circuit Current (Isc) |
6.86 A |
Temperature |
113 °F ± 3.6 °F / 45 ± 2 °C |
Nominal Operating Cell Temperature (NOCT): 800W/m2, AM 1.5, windspeed 1m/s,ambient temperature 20°C
THERMAL RATINGS
Operating Temperature Range |
-40 °F ~ 185 °F / -40 ~ 85 °C |
Temperature Coefficient of Pmax |
-0.45 %/°C |
Temperature Coefficient of Voc |
-0.33 %/°C |
Temperature Coefficient of Isc |
0.06 %/°C |
MAXIMUM RATINGS
Maximum System Voltage |
600 V |
Series Fuse Rating |
15 A |
MATERIAL DATA
Panel Dimension (H/W/D) |
64 1/2" x 38 5/8" x 1 9/16" (1642 x 994 x 40mm) |
Weight |
44.1 lbs (20 kg) |
Cell Type |
Polycrystalline |
Cell Size |
6 1/8" x 6 1/8" (156 ×156mm) |
Cell Number |
60 |
Glass Type |
Tempered, Anti-reflection Coating |
Glass Thickness |
3.2 mm |
Encapsulant Type |
EVA |
Back Cover Type |
TPT |
Frame Type |
Anodized Aluminium Alloy |
Junction Box Diodes |
3 |
Junction Box Protection Class |
IP 65 |
Connector Type |
MC4 |
Cable Crosssection |
4 mm2 |
Cable Length |
39.37" (1000mm) |
Solar panel cables
Specifications
- Photo voltaic (PV) wire
- 10 AWG Double strand
- 50 feet in length (custom lengths at 5 feet intervals of length can be made to order from 10 to 100 feet)
- UL4703
- Operates in temperatures from -40°F TO 257°F Wet or Dry / (-40°C - 125°C)
- Sun resistant
- 600V
The Solar Max 6000-12 Expanded provides silent, safe, substantial power for your RV, trailer or cabin to save gas & generator life. With this system you can truly become long term self-sufficient. This is literally a small house/cabin system on wheels capable of expanding by being able to easily connect more batteries and solar panels.
Optional extras
Solar Max 6000 - Battery Bank Expansion Connector (Option C)
Price: $100
Click here for Option C page
Quick Connect (Anderson) connector for the SOLAR MAX 6000. Allows you to plug the Battery Bank on Wheels into the Solar Max 6000 without having to wire directly into the power box.
Solar Panel stand
Click here to go to product page

HEAVY DUTY STEEL, WHEELED, EASY ADJUSTABLE CART.. Easy assembly, easy attachment to any full size solar panel. (Simply drill 6 holes in solar panel frame.) This stand is adjustable for angles from 30 degrees to 60 degrees. (to adjust for position of the sun)
Solar panel wire 100 foot length from 50 foot
Price: $78.95 per cable
Click here to go to product page
Cable specifications
- Photo voltaic (PV) wire
- 10 AWG Double strand
- 100 feet in length (custom lengths at 5 foot intervals of length can be made to order from 10 to 100 feet)
- UL4703
- Operates in temperatures from -40°F TO 257°F Wet or Dry / (-40°C - 125°C)
- Sun resistant
- 600V
Nano coating for solar panels
Price for 1 panel: $34.95
Click here for product page
Price for 2 + panels: $30.95 (per panel cost)
Click here for product page
Make your solar panels 10%--35% more efficient
Solar panels with the patented PLT Enhancement treatment -- have been shown to produce 10%--35% more energy than untreated panels. Average energy improvement within 24 hrs of treatment is 13%. After 6 months energy improvement increases up to 35%.
- Make more energy...better return on your investment ◦ (For example, 10 panels at 240watts ea, 2400 watts combined, at just a 25% improved efficiency would produce 600 more watts every hour.)
- Save $$ on cleaning costs...(50%--75+%)
- 20 year warranty!
- Not only does the treatment produce more energy from your panels, but it also helps clear atmospheric pollution. Things like Carbon Monoxide, Benzene, Nitrogen Dioxide, Hydrocarbons, smog, etc.)
- Pays for itself often in less than a year. (Depending on how dirty an environment your panels are in and/or how much sun they get.)
HOW DOES IT WORK: The treatment uses two specialized formulas (one is patented and the other is proprietary) to permanently bond a nano thin layer of Enhanced Titanium Dioxide Nano Particles to the surface of the solar panel. This layer of Titanium Dioxide particles, when exposed to the sun, helps the solar panel absorb photons from the sun, immediately increasing it's efficiency up to 13%. Additionally, the photocatalytic action of the patented TiO2 formula eliminates static electricity from the surface of the panel. This has two effects: First, it is static electricity that attracts and holds dust, dirt, oil, pollution, etc. to the panels glass surface. With no static electricity... the panel stays cleaner longer. Secondly, when water hits the panel, the photocatalytic action eliminates the surface tension of the water droplet. Water surface tension & static electricity is what holds the water to the panel. With no attraction, water just flows off quickly and easily, carrying "gravity held" dirt and pollution along with it. This action is called "hydrophilic" as opposed to the normal "hydrophobic" beading/sticking action of water. (For more information on the patented TiO2 formulations and how they work, go to www.PURE-LIGHT.COM)
Battery Bank on Wheels
Designed to compliment the Solar Maxx Cabin 6000-12 Expanded system.
Flat Rate shipping of $400 anywhere in the Continental U.S.
Check for current pricing and options.
Contact our team for customized design expansions:
Phone: 208-745-7100
Email: support@totalsolar.us