Receive emails from Total Solar Technologies on product Sales, Promotions, New Products, and Solar News that could save you $$hundreds of dollars.
Your information will not be sold or abused. (1-2 emails a month)
How did you hear about us?
What are you most interested in?


SKU : TSI-1000-10k L


Introducing the SOLAR MAXX 10,000 LITHIUM
A full fledged $35,000+ LITHIUM SOLAR HOUSE SYSTEM... for an incredible $25,875...AND... it's "Plug N Play"  ...AND...   Portable ...AND... FREE SHIPPING!!   Saves you $$ on installation costs, inspections, engineering, etc. ---PLUS--- you can take it with you when you move or go to your cabin!

FREE SHIPPING!  (Anywhere in the Continental US)

We keep getting more and more requests for larger portable systems at discount prices, and so here is our latest creation.  It only comes with Lithium batteries.  

GET MORE "POWER" FOR YOUR MONEY WITH LITHIUM!  LIthium increases the life of the batteries by up to 5  times with double the available power, faster recharge rates, longer power retention, lighter weight.  

-- Simply lay out the solar panels, plug them into the "box" and you are ready to go. Save $$ on installation costs of a full. 
--Provides an incredible 30,000 watts of power on a sunny summer day!*
 *(8 hours of direct sun on solar panels)

-- The power to run a small AC unit.  
--14,000 watts of Lithium Battery Power. 
-- System box is 24" wide x 60" long, on 10" ALL TERRAIN-GO ANYWHERE pneumatic swivel tires. 

        --Can upgrade to the 12,000 watt inverter: $800. 
        -- Lid Closed Operation...Can make it usable with the Lid closed. 
                    adds auto temp fans to the system:  $300
        -- To add a 220V wall battery charging cable: $180

BATTERY CHARGING NOTE: The system is designed to have primarily a minimum of 2 solar panels hooked up and keeping the batteries charged if the system is not in use.  With the inverter turned off, this will keep the system charged even on multiple cloudy days. 
--THERE IS the option of using the internal 80 amp 220V FAST charger that is contained within the Inverter.  However, it only works with 
220V and needs to be monitored and should be installed by a qualified electrician


Cash or check preferred.  Credit Cards purchases will be charged a processing fee of 3.5%

Federal and State tax credits/deductions can pay for 30%-70% of the cost of the system.


The Solar Max 10,000 Lithium is as large as our portable generators come before going to trailers. A heavy duty portable solar generator capable of powering a small house or parts of a larger house. The 10,000 watt 48 volt pure sine wave inverter is split phase capable at 110/220vac and is capable of an 30,000 watt surge for 20 seconds. (Scroll down for detailed inverter specifications).
As a pure sine wave inverter it's capable of powering computers, recharging lithium battery devices, running CPAP machines, professional audio/video equipment or tools with a variable speed capability and most everything* else at or less than 10,000 watts like most fridges, freezers, TV's, furnace blower motors, most well pumps, even small AC units and heaters. (*Read detailed inverter specification for amp. information)

This inverter is powered by six 12 volt 120 Amp hour Lithium LiFePO4 batteries connected in series to the 48 volt inverter.
Capable of providing 14,000 useable Kilowatt Hours (KWH).  (may replace 120 ahr batteries with equivilant 200+ ahr batteries)

This system comes with Sixteen 300 watt solar panels for 4800 watts of sun power per hour of direct sun!
Housed in a heavy duty 18 gauge, rust resistant powder coated steel box, the Solar Max 10,000-Lithium more than packs in the power while still remaining portable.

Comes complete with:

  • 1 - 48 volt 10,000 watt pure sine wave inverter 110/220 split phase 
  • 12 x RB100 12V 120Ah LiFePO4 Batteries
  • 2 x 60 Amp MPPT Solar Charge Controllers
  • 1 - digital voltage display to keep an eye on your battery level
  • 1 - 30 Amp RV plug
  • 1 - 30 Amp 220 plug
  • 1 - 3 outlet power strip 15A/125V 1.875W, 
  • 16 - 300 watt polycrystalline solar panels for 4800 watts of solar energy
  • 8 - 50 foot 2*x10AWG gauge *(positive & negative) UL4703 PV Wire to connect solar panel to system. One wire connects to two solar panels. Panels will need to be positioned side by side in pairs. (100 foot upgrade)
  • 1 - solid steel box powder coated, weather proof  with 8" All Terrain tires. 
    • 48"L x 24"W x 33"H  
  • 1 - Manual packet with quick start guide and all component manual
  • 2 year warranty
Scroll down for more detailed component specifications
Component features and specifications outlined below.

Split Phase Inverter 10,000 watt 48 volt Pure sine wave inverter

This split phase inverter is capable of producing 110/220vac. It will work virtually anywhere in the world, with the ability to produce 50 hz or 60 hz.

The built-in charger allows for you to use your existing grid power to maintain a charge on your batteries. It also includes an Auto-Gen start that will tell your Auto-Start Compatible generator to turn on and provide power for your secondary 48 volt charger.

This whole home power inverter is great for your emergency battery backup for when the grid goes down with an unnoticeable transfer time of 10 milliseconds, or for use as a standalone off-grid system. Kill your power bill and save the earth with this inverter charger. Use this inverter in your coach bus RV, large toy hauler or fifth wheel. It will provide you with plenty of power for your mobile home, boat house or yacht. No sense in dealing with noisy diesel engines when you can have quiet, efficient and free power provided by the sun.

No matter where you are on the globe, you can use this inverter charger. It will accept power from any grid system, on 50 or 60hz. If you're looking to keep the lights on and food fresh while the rest of the neighborhood is in the dark, look no further than the AIMS 6000 Watt Low Frequency Inverter. Prepare for the worst with the best.

Advantages of a Pure Sine Inverter:

  • Equipment runs more efficiently
  • Motors run cooler
  • Cleaner power
  • Ideal for power tool chargers, laser printers, electric shavers, microwaves, variable speed motors, TV's, medical equipment
  • 10000 watt low frequency inverter 110/220Vac Split Phase
  • 30000 watt surge for 20 seconds -3x surge capability
  • Battery Priority Selector
  • Terminal Block
  • Marine Coated and Protected
  • Multi Stage Smart charger 100 Amp charges GEL, Lead, AGM, Lithium
  • Remote panel available
  • 10msec typical transfer time
  • Selectable 25W power save mode (hibernation)
  • 8 battery charger settings
  • Automatic transfer switch

Inverter Output Specifications:

  • Continuous Output Power: 10000 Watts
  • Surge Rating: 30000 Watts (20 Seconds)
  • Output Waveform: Pure Sine/Same as input (Bypass Mode)
  • 100-110-120Vac / 220-230-240Vac
  • Nominal Efficiency: >88% (Peak)
  • Line Mode Efficiency: >95%
  • Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
  • Typical Transfer Time: 10ms (Max)
  • THD: < 10% DC
  • Ambient operating temperature: 14°F to 122°F (-10°C to 50°C)

Input Specifications

  • Nominal Input Voltage: 48.0Vdc
  • Low Battery Alarm: 42.0Vdc-44.0Vdc
  • Low battery Trip: 40.0Vdc-42.0Vdc
  • High Voltage Alarm: 64.0Vdc
  • Low battery Voltage Restart: 62.0Vdc
  • Idle Consumption: 150 Watts
  • Power Saver Mode Idle Consumption: 35 Watts

Charger Specifications

  • Output voltage: Depends on battery Type
  • Charger Rate: 100A
  • 6000 watt low frequency inverter 110/220Vac Split Phase
  • 18000 watt surge for 20 seconds -3x surge capability
  • Battery Priority Selector
  • Terminal Block
  • GFCI
  • Marine Coated and Protected
  • Multi Stage Smart charger 90 Amp
  • remote panel available
  • auto gen start
  • auto frequency
  • 10msec typical transfer time
  • optional 25W power save mode
  • 8 battery charger settings

Inverter Output Specifications:

  • Continuous Output Power: 6000 Watts
  • Surge Rating: 18000 Watts (20 Seconds)
  • Output Waveform: Pure Sine/Same as input (Bypass Mode)
  • Nominal Efficiency: >88% (Peak)
  • Line Mode Efficiency: >95%
  • Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
  • Typical Transfer Time: 10ms (Max)
  • THD: < 10% DC

Input Specifications

  • Nominal Input Voltage: 24.0Vdc
  • Low Battery Alarm: 21.0Vdc-22.0Vdc
  • Low battery Trip: 20.0Vdc-21.0Vdc
  • High Voltage Alarm: 32.0Vdc
  • Low battery Voltage Restart: 31.0Vdc
  • Idle Consumption: <10 amps without power saver
  • Idle Consumption in Power Saver Mode: <<1 amps

Charger Specifications

  • Output voltage: Depends on battery Type
  • Charger Rate: 80A



  • Maximizes Energy Harvest
  • Extremely High Reliability
  • Very High Efficiency  99%
  • Extensive Networking and Communication Capabilities
  • Metering and Data Logging
  • Certified to IEC 62093
General specifications
TriStar MPPT TS-MPPT-60    
Maximum Battery Current 60 amps    
Nominal Maximum Solar Input
12 volt 800 Watts    
24 volt 1600 Watts    
48 volt 3200 Watts    
Nominal System Voltage 12, 24, 36 or 48 volts DC
Maximum Solar Open Circuit Voltage 150 volts DC
Peak Efficiency 99%
Battery Operating Voltage Range 8-72 volts DC
Maximum Self-consumption 2.7 Watts
Transient Surge Protection 4500 Watts/port
Electronic Protection
Solar Overload, Short Circuit, High Voltage
Battery High Voltage
Batttery Charging
Charging algorithm 4-stage
Charging stages Bulk, Absorption, Float, Equalize
Temperature Compensation
                       Coefficient   –5mV/C/cell (25 ref)
                       Range –30C to +80C
                       Set Points Absorption, Float, Equalize, HVD
Ambient Temprature –40C to +45C
Storage Temperature –55C to +100C
Humidity 100% non-condensing
Tropicalization Epoxy encapsulation Conformal coating Marine rated terminals
Communication Ports
MeterBus Yes Yes Yes
RS-232 Yes Yes Yes
EIA-485 No No Yes
Ethernet No No Yes

Display type Multi color LED indicates the operating and battery voltage status
Regulation method Solid state, three-stage (bulk, absorption, and float), pulse width modulation
Field adjustable control setpoints Two user adjustable voltage setpoints for control of loads or charging sources –
settings retained if battery is disconnected
Equalization charge User selectable manual or automatic equalization – every 30 days

Regulatory approval
Safety UL listed to UL1741* and CSA 107.1-01; CE Marked for the Low Voltage Directive
EMC FCC and Industry Canada Class B, CE Marked for the EMC Directive
  • 12 - RELiON 12V 100AH IRON PHOSPHATE BATTERIES.   The ReLiON is one of our most popular batteries. The RB100 is a safer, more lightweight alternative to lead-acid in your solar applications. It maintains consistent power and is equipped with an M8 terminal type and and a built-in battery management system (BMS).  It is maintenance free.  The RB100 battery meets UL, UN, CE and IEC certifications. 


    Nominal Voltage 12.8 V
    Nominal Capacity 100 Ah
    Capacity @ 25A 240 min
    Energy 1280 Wh
    Resistance ≤ 30 mΩ @ 50% SOC
    Efficiency 99%
    Self Discharge <3% per Month
    Maximum Modules in Series 6


    Dimensions (L x W x H) 13.0 x 6.8 x 8.8” 329 x 172 x 223 mm
    Weight 30 lbs (13.5 kg)
    Terminal Type M8
    Terminal Torque 80 - 100 in-lbs (9 - 11 N-m)
    Case Material ABS
    Enclosure Protection IP56
    Cell Type - Chemistry Cylindrical - LiFePO4


    Maximum Continuous Discharge Current 100 A
    Peak Discharge Current 200 A (7.5 s ±2.5 s)
    BMS Discharge Current Cut-Off 280 A ±50 A (9 ±4 ms)
    Recommended Low Voltage Disconnect 11 V
    BMS Discharge Voltage Cut-Off 8 V (2.0 ±0.08 vpc) (140 ±60 ms)
    Reconnect Voltage 9.2 V (2.3 ±0.1 vpc)
    Short Circuit Protection 200-600 µs


    Recommended Charge Current 50 A
    Maximum Charge Current 100 A
    Recommended Charge Voltage 14.2 V - 14.6 V
    BMS Charge Voltage Cut-Off 15.6 V (3.9 ±0.025 vpc) (1.1 ±0.4 s)
    Reconnect Voltage 15.2 V (3.8 ±0.05 vpc)
    Balancing Voltage 14.4 V (3.6 ±0.025 vpc)


    Discharge Temperature -4 to 140 ºF (-20 to 60 ºC)
    Charge Temperature -4 to 113 ºF (-20 to 45 ºC)
    Storage Temperature 23 to 95 ºF (-5 to 35 ºC)
    BMS High Temperature Cut-Off 176 ºF (80 ºC)
    Reconnect Temperature 122 ºF (50 ºC)


    Certifications CE (battery)
      UN38.3 (battery)
      UL1642 & IEC62133 (cells)
    Shipping Classification UN 3480, CLASS 9

Solar panels
  Note: Solar Panel brand may change due to availability



Model No. CS6P-235PX


Power Warranty 25 Years of 80% Output Power
Product Warranty 10 Years

ELECTRICAL DATA AT STC (Standard Test Conditions)

Maximum Power (Pmax)  300 W
Voltage at Maximum Power (Vmpp)  29.8 V
Current at Maximum Power (Impp)  8.90 A
Open Circuit Voltage (Voc)  36.9 V
Short Circuit Current (Isc)  8.46 A
Panel Efficiency  14.61 %
Power Tolerance (Positive)  0 ~ + 5 W
*Standard Test Conditions (STC): air mass AM 1.5, irradiance 1000W/m2, cell temperature 25°C

ELECTRICAL DATA AT NOCT (Nominal Operating Cell Temperature)

Maximum Power (Pmax)  170 W
Voltage at Maximum Power (Vmpp)  27.2 V
Current at Maximum Power (Impp)  6.27 A
Open Circuit Voltage (Voc)  33.9 V
Short Circuit Current (Isc)  6.86 A
Temperature  113 °F ± 3.6 °F / 45 ± 2 °C
Nominal Operating Cell Temperature (NOCT): 800W/m2, AM 1.5, windspeed 1m/s,ambient temperature 20°C


Operating Temperature Range  -40 °F ~ 185 °F / -40 ~ 85 °C
Temperature Coefficient of Pmax  -0.45 %/°C
Temperature Coefficient of Voc  -0.33 %/°C
Temperature Coefficient of Isc  0.06 %/°C


Maximum System Voltage  600 V
Series Fuse Rating  15 A


Panel Dimension (H/W/D)  64 1/2" x 38 5/8" x 1 9/16"  (1642 x 994 x 40mm) 
Weight   44.1 lbs                            (20 kg)                  
Cell Type  Polycrystalline
Cell Size  6 1/8" x 6 1/8"                    (156 ×156mm)        
Cell Number  60
Glass Type  Tempered, Anti-reflection Coating
Glass Thickness  3.2 mm
Encapsulant Type  EVA
Back Cover Type  TPT
Frame Type  Anodized Aluminium Alloy
Junction Box Diodes  3
Junction Box Protection Class  IP 65
Connector Type  MC4
Cable Crosssection  4 mm2
Cable Length  39.37"                                 (1000mm)

Solar panel cables


  • Photo voltaic (PV) wire
  • 10 AWG Double strand
  • 50 feet in length (custom lengths at 5 feet intervals of length can be made to order from 10 to 100 feet)
  • UL4703
  • Operates in temperatures from -40°F TO 257°F  Wet or Dry /   (-40°C - 125°C)
  • Sun resistant
  • 600V

Solar Panel stand

Price: $.95 
Click here to go to product page

HEAVY DUTY STEEL, WHEELED, EASY ADJUSTABLE CART.. Easy assembly, easy attachment to any full size solar panel. (Simply drill 6 holes in solar panel frame.)   This stand is adjustable for angles from 30 degrees to 60 degrees.  (to adjust for position of the sun)

Solar Panels

ADD 1, 2, or 3 additional 235 watt solar panels

Buy now to save on shipping later.
Price: $210 for each additional solar panel

Click here to go to product page


Solar panel wire 100 foot length from 50 foot


Price: $78.95 per cable
Click here to go to product page
Cable specifications

  • Photo voltaic (PV) wire
  • 10 AWG Double strand
  • 100 feet in length (custom lengths at 5 foot intervals of length can be made to order from 10 to 100 feet)
  • UL4703
  • Operates in temperatures from -40°F TO 257°F  Wet or Dry /   (-40°C - 125°C)
  • Sun resistant
  • 600V

Nano coating for solar panels

Price for 1 panel: $34.95
Click here for product page

Price for 2 + panels: $30.95 (per panel cost)
Click here for product page

Make your solar panels 10%--35% more efficient

Solar panels with the patented PLT Enhancement treatment -- have been shown to produce 10%--35% more energy than untreated panels. Average energy improvement within 24 hrs of treatment is 13%. After 6 months energy improvement increases up to 35%.

  • Make more energy...better return on your investment ◦ ​(For example, 10 panels at 240watts ea, 2400 watts combined, at just a 25% improved efficiency would produce 600 more watts every hour.)
  • Save $$ on cleaning costs...(50%--75+%)
  • 20 year warranty!
  • Not only does the treatment produce more energy from your panels, but it also helps clear atmospheric pollution. ​Things like Carbon Monoxide, Benzene, Nitrogen Dioxide, Hydrocarbons, smog, etc.)
  • Pays for itself often in less than a year. (Depending on how dirty an environment your panels are in and/or how much sun they get.)

HOW DOES IT WORK: The treatment uses two specialized formulas (one is patented and the other is proprietary) to permanently bond a nano thin layer of Enhanced Titanium Dioxide Nano Particles to the surface of the solar panel. This layer of Titanium Dioxide particles, when exposed to the sun, helps the solar panel absorb photons from the sun, immediately increasing it's efficiency up to 13%. Additionally, the photocatalytic action of the patented TiO2 formula eliminates static electricity from the surface of the panel. This has two effects: First, it is static electricity that attracts and holds dust, dirt, oil, pollution, etc. to the panels glass surface. With no static electricity... the panel stays cleaner longer. Secondly, when water hits the panel, the photocatalytic action eliminates the surface tension of the water droplet. Water surface tension & static electricity is what holds the water to the panel. With no attraction, water just flows off quickly and easily, carrying "gravity held" dirt and pollution along with it. This action is called "hydrophilic" as opposed to the normal "hydrophobic" beading/sticking action of water. (For more information on the patented TiO2 formulations and how they work, go to www.PURE-LIGHT.COM)


Contact our team for customized design expansions:
Phone: 208-745-7100