slide
slide
slide
slide
slide
slide
 
 
emails
Receive emails from Total Solar Technologies on product Sales, Promotions, New Products, and Solar News that could save you $$hundreds of dollars.
Your information will not be sold or abused. (1-2 emails a month)
How did you hear about us?
What are you most interested in?

PURE SINE WAVE - 10,000 WATT 48V/110V-220V MARINE HEAVY DUTY INVERTER

SKU : TSI-10109
$3,258.00

Pure Sine Wave - 10,000 Watt 48V 110V-220Vac Heavy Duty Inverter

This inverter will output 120 or 220/230/240Vac, and it can output 50 or 60Hz via the SW4 switch on the DC side of the product. This means that this inverter works internationally and is operable with nearly any electrical system on the planet!

Built with a 48 volt DC input, this inverter performs with very little power loss. Users receive a notable increase in efficiency in large systems when compared to using 12 or 24 volts, which can be an attractive feature for sustainability lovers looking to live as efficiently as possible.

The most common use for this inverter is emergency backup power in homes, business and recreation locations. You’ll always be prepared for the next power outage with access to 10000 watts of continuous power and 30,000 watts of surge (for up to 20 seconds).

One of the most sought-after features this inverter has is the direct-connect terminal block, which allows users to surpass the 10000 watt capacity and harness its 300% surge power (up to 30,000 watts for 20 seconds as previously stated).

It’s also built to withstand reasonable heat and temperature fluctuations because of its over-temperature protection and dual thermally-controlled fans.  And it’s protected from humidity or dust and dirt by virtue of its marine-coated or “conformal-coated” boards. This inverter provides the reliability needed in any business or residential emergency backup power applications.

Features:
10000 watt low frequency inverter 110/220Vac Split Phase
30000 watt surge for 20 seconds -3x surge capability
Battery Priority Selector
Terminal Block
Marine Coated and Protected
Multi Stage Smart charger 100 Amp
remote panel available
10msec typical transfer time
selectable 25W power save mode (hibernation)
8 battery charger settings
 

10000 Watt Inverter Charger - 48 volt to 120/240vacInverter Output Specifications:

Continuous Output Power: 10000 Watts
Surge Rating: 30000 Watts (20 Seconds)
Output Waveform: Pure Sine/Same as input (Bypass Mode)
100-110-120Vac / 220-230-240Vac
Nominal Efficiency: >88% (Peak)
Line Mode Efficiency: >95%
Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
Typical Transfer Time: 10ms (Max)
THD: < 10% DC
 

Inverter Input Specifications:
 

Nominal Input Voltage: 48.0Vdc
Low Battery Alarm: 42.0Vdc-44.0Vdc
Low battery Trip: 40.0Vdc-42.0Vdc
High Voltage Alarm: 64.0Vdc
Low battery Voltage Restart: 62.0Vdc
Idle Consumption: 150 Watts
Power Saver Mode Idle Consumption: 35 Watts

Charger Specifications
 
Output voltage: Depends on battery Type
Charger Rate: 100A

Dimensions 
 
Unit Weight: 145.5 lbs. / 66 kg
Unit Size L x W x H: 23.3 x 16.3 x 7.9 inches / 592mm x 414mm x 201mm
Shipping Weight: 190 lbs. / 86.2 kg
Shipping L x W x H 30 x 21.25 x 15.25 inches / 762mm x 540mm x 387.4mm
$3,258.00
0.06