Receive emails from Total Solar Technologies on product Sales, Promotions, New Products, and Solar News that could save you $$hundreds of dollars.
Your information will not be sold or abused. (1-2 emails a month)
How did you hear about us?
What are you most interested in?


SKU : TSI-4007L

DIY Off-grid Solar House Kit - Larger+ House with Lithium Batteries

An Incredible Price for an Incredible System

Free Shipping within the entire Continental United States!!!

A COMPLETE LARGER+ SOLAR AND BATTERY BACKUP DIY KIT SYSTEM with 24,000 Wh of usable battery energy

MORE POWER, LONGER LASTING, LESS WEIGHT!  (Long term-- a better WH/$ investment)  Over 38 million watt hours over life of batteries!


Comes complete with:
  • 1 - 12,000 watt 48 volt low frequency inverter with 110/220Vac Split Phase
  • - 295+ watt polycrystalline solar panels for a total output for 9400 w of out put (note: panel counts is determined by panel wattage at time of order.)  average panels 26 to 32 depending on size.
  • 16 - 200 Ah 12 volt LiFePO4 Lithium Iron Phosphate Batteries
  • 4 - 80 Amp 48 volt MPPT Multi stage smart solar charge controllers
  • 1 - Xantrex Power Distribution box with 250 amp battery shut off breaker
  • 3 - 12 breaker Combiner box with 10 15 Amp breakers installed
  • 50 feet of solar panel cable per panel and all associated cables
      (see details in cable specifications below)      

*Easily expandable!!   just add more batteries, solar panels, charge controllers.


AIMS Power introduces its new battery product line of LiFePO4 batteries. The LiFePO4 batteries maintain constant output voltage, providing more efficient power. This allows the cell to deliver virtually full power until it is fully discharged without harming the battery, and it can greatly simplify or even eliminate the need for voltage regulation circuitry. The battery has a much longer cycle life capacity, and is easier to maintain compared to other battery technologies. The LiFePO4 technology has better thermal and chemical stability, which improves battery safety and packed with power in a small and lightweight footprint. Easily uses the same space as your existing 12V battery and replaces lead acid, AGM or Gel battery applications in RVs, boats, commercial vehicles, off grid back up power and much more. 

4000-5000 cycles 10 year warranty

  • Extremely high number of charge/discharge cycles4000-5000
  • > 10 Year lifespan with proper maintenance
  • Wide operating temperature range
  • Unsurpassed high temperature performance
  • Green energy without metal contaminant
  • Low maintenance
  • High amp capacity
  • Stable output voltage
  • Little self-discharge
  • BMS safety protection. Each cell is fused and if for some unlikely situation a cell fails, this design will isolate the cell stopping any other damage and allows the battery to function safely
  • Convenient removable carry handle
  • Lightweight
  • 50, 100 & 200 Ah models available
  • Short circuit protected
  • Physical damage to battery case will not cause fire
  • Excessive thermal exposure will not cause a fire
  • Able to withstand over-charge/over-discharge without damage to the battery
  • Sophisticated Battery Management System (BMS)

Electrical Specifications LFP12V100A
Nominal Voltage 12.8V
Nominal Capacity (at .5C, 77°F) 120Ah
Minimum Capacity (at .5C, 77°F) 95Ah
Expected Cycle Life >4000 cycles w/1C charge and discharge rate, at 77°F, 80% DOD
Operating Specifications  
Charge Method Smart charger, constant current, constant voltage
Charge Voltage Range (Max 14.6V) 14.4 -14.6V
Continuous Charge Current 100A Max
Charge Temperature 32° F to 113° F
Continuous Discharge Current 100A Max
Peak Instant Discharge Current (10 secs) 200A
Over Voltage Shutdown 15.6 +/-.2V
Discharge Cut-off Voltage 8V =/- .5V
Discharge Temperature -4° F to 149° F
Storage Temperature -4° F to 113° F
Self Disharge (stored at 50% SOC) < 3%/month
Watt hours 1200 watt hours
Physical Specifications  
Battery Dimensions 12.75″L x 6.5″W x 8.75″H
Weight 30.2 lb
Shipping Weight 32 lb
Group Size 31
Battery post size 5/16″
BMS Operation  
Over Charge Protection Over charge detection voltage:   3.9 +/- .05V
Over charge detection delay time:   .96 – 1.4s
Over charge release voltage:   3.80 +/-.05V
Maximum charge voltage:   3.65 +/-.05V
Over Discharge Protection Over discharge detection voltage:   2.0V +/- .05V
Over discharge detection delay time:   115-173ms
Over discharge release voltage:   2.3V +/- .10V
Over Current Protection Over current detection delay time:   9 +/- 2ms
Over current release condition:   Cut load
Polarity Reverse Protection Yes
Short Circuit Protection Yes
UPC 840271004587
Warranty 10 Yr Manufacturer Defect



 Cash or check preferred.  Credit Cards purchases will be charged a processing fee of 5%.) 

Federal and State tax credits/deductions can pay for 40%-70% of the cost of the system.

This unique 48 volt system is simply superior in design and quality. It’s for those people who want a DIY complete solar system kit
they can put on their cabin, house, or trailer to become completely energy independent. Designed to have solar panels and
batteries easily added later for even more power.


This unique 48 volt system is simply superior in design and quality. It’s for those people who want a DIY complete solar system kit they can put on their cabin, house, or trailer to become completely energy independent. Designed to have solar panels and batteries easily added later for even more power.

Component features and specifications outlined below.


Built with a 48 volt DC input, this inverter performs with very little power loss. Users receive a notable increase in efficiency in large systems when compared to using inverters that accept 12 or 24 volts. This can be an attractive feature for sustainability lovers looking to live as efficiently as possible.

The most common use for this inverter is emergency backup power for residences and business. You’ll always be prepared for the next power outage with access to 12,000 watts of continuous power and 36,000 watts of surge (for up to 20 seconds).

 One of the most sought-after features this inverter has is the direct-connect terminal block, which allows users to surpass the 12,000 watt capacity and harness its 300% surge power (up to 36,000 watts for 20 seconds as previously noted).

This inverter is also built to withstand reasonable heat and temperature fluctuations because of its over-temperature protection and dual thermally-controlled fans.  And it’s protected from humidity or airborne dust and dirt by virtue of its marine-coated (or “conformal-coated”) boards. This inverter provides the reliability needed in any business or residential emergency backup power applications.

This inverter is split-phase and will output 120 or 220/230/240Vac, and it can output 50 or 60Hz via the SW4 dipswitch on the DC side of the product. This means that this inverter works internationally and is operable with nearly any electrical system on the planet!


12000 watt low frequency inverter 110/220Vac Split Phase
36000 watt surge for 20 seconds -3x surge capability
Battery Priority Selector
Terminal Block
Marine Coated and Protected
Multi Stage Smart charger 120 Amp
remote panel available
10msec typical transfer time
selectable 25W power save mode (hibernation)
8 battery charger settings

Inverter Specifications

Output Specifications:
Continuous Output Power: 12000 Watts
Surge Rating: 36000 Watts (20 Seconds)
Output Waveform: Pure Sine/Same as input (Bypass Mode)
100-110-120Vac / 220-230-240Vac  
Nominal Efficiency: >88% (Peak)
Line Mode Efficiency: >95%
Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
Typical Transfer Time: 10ms (Max)
THD: < 10% DC

Input Specifications:

Nominal Input Voltage: 48.0Vdc
Low Battery Alarm: 42.0Vdc-44.0Vdc
Low battery Trip: 40.0Vdc-42.0Vdc
High Voltage Alarm: 64.0Vdc
Low battery Voltage Restart: 62.0Vdc
Idle Consumption: 200 Watts
Power Saver Mode Idle Consumption: 40 Watts

Charger Specifications
Output voltage: Depends on battery Type
Charger Rate: 120A

Unit Weight: 174 lbs.                         (78.93 kg)
Unit Size L x W x H: 23.3 x 16.3 x 7.9 inches     (592mm x 414mm x 201mm)
Shipping Weight: 200 lbs.                             (90.72 kg)
Shipping L x W x H: 30 x 21.25 x 15.25 inches   (762mm x 540mm x 387.4mm)


Solar Panels


Model No. CS6P-235PX


Power Warranty 25 Years of 80% Output Power
Product Warranty 10 Years

ELECTRICAL DATA AT STC (Standard Test Conditions)

Maximum Power (Pmax)  235 W
Voltage at Maximum Power (Vmpp)  29.8 V
Current at Maximum Power (Impp)  7.90 A
Open Circuit Voltage (Voc)  36.9 V
Short Circuit Current (Isc)  8.46 A
Panel Efficiency  14.61 %
Power Tolerance (Positive)  0 ~ + 5 W
*Standard Test Conditions (STC): air mass AM 1.5, irradiance 1000W/m2, cell temperature 25°C

ELECTRICAL DATA AT NOCT (Nominal Operating Cell Temperature)

Maximum Power (Pmax)  170 W
Voltage at Maximum Power (Vmpp)  27.2 V
Current at Maximum Power (Impp)  6.27 A
Open Circuit Voltage (Voc)  33.9 V
Short Circuit Current (Isc)  6.86 A
Temperature  113 °F ± 3.6 °F / 45 ± 2 °C
Nominal Operating Cell Temperature (NOCT): 800W/m2, AM 1.5, windspeed 1m/s,ambient temperature 20°C


Operating Temperature Range  -40 °F ~ 185 °F / -40 ~ 85 °C
Temperature Coefficient of Pmax  -0.45 %/°C
Temperature Coefficient of Voc  -0.33 %/°C
Temperature Coefficient of Isc  0.06 %/°C


Maximum System Voltage  600 V
Series Fuse Rating  15 A


Panel Dimension (H/W/D)  64 1/2" x 38 5/8" x 1 9/16"  (1642 x 994 x 40mm) 
Weight   44.1 lbs                            (20 kg)                  
Cell Type  Polycrystalline
Cell Size  6 1/8" x 6 1/8"                    (156 ×156mm)        
Cell Number  60
Glass Type  Tempered, Anti-reflection Coating
Glass Thickness  3.2 mm
Encapsulant Type  EVA
Back Cover Type  TPT
Frame Type  Anodized Aluminium Alloy
Junction Box Diodes  3
Junction Box Protection Class  IP 65
Connector Type  MC4
Cable Crosssection  4 mm2
Cable Length  39.37"                                 (1000mm)
Solar Charge Controller
Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard. MSRT can ensure very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency,corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer AN products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel. The load, utility or generator auto-control relays make it easy to compose the hybrid power system.



Xantrex XW Series Power Distribution Panel (PDP)

Dimensions (H x W x D) 30 x 16 x 8.3 in   (761 x 406 x 210 mm)
Shipping dimensions (H x W x D) 48 x 21 x 3.5 in   (1220 x 533 x 343 mm)
Shipping weight 67.2 Lbs.            (30.5 kg)
Included XW+ PDP enclosure with a field-reversible panel door, includes wall mount bracket, and XW+ Conduit Box
  (3) 60 A, 120/240 Vac, two-pole Square-D, type QOU, DIN-rail mounted AC breakers for AC input, bypass and
AC load (factory-installed), plus five AC breaker expansion positions
  One GJ 250A 160 Vdc, 3/8” stud DC breaker installed, plus two expansion positions
  Eight expansion positions for charge controller DC breakers (Note: XW supports up to 4 MPPT 80 600 or 4 MPPT 60 150 charge controllers)
  One ground terminal bus bar, one neutral terminal bus bar and one battery negative terminal bus bar
  One pair #4/0 AWG Arctic Ultraflex Blue™ battery cables (factory installed and labeled, ready to connect)
  #6 AWG Arctic Ultraflex Blue™ AC wiring (factory installed and labeled, ready to connect)

Combiner Box

Midnite Solar MNPV12 Combiner Box
Aluminum rainproof type 3R enclosure
Internal plastic injection molded dead front cover
Knock outs that accept waterproof strain reliefs, conduit or panel mount MC type connectors
Knock outs for lightning arrestors
Uses 150 VDC breakers
ETL listed to UL1741 for use in the US and Canada

Max VDC 150
Max # of Input Circuits 12
PV Source Circuits - Max OCPD Rating Amps 30
PV Source Circuits - OCPD CB 150V
PV Source Circuits - Wire Range AWG 14 - 6
PV Output Circuits - Max # of Output Circuits 2
PV Output Circuits - Max Cont. Current Amps 200
PV Output Circuits - Wire Range AWG 14 - 2/0
Approved Mounting Orientation 90° to 14°
Enclosure Type/Material 3R/Alum
Listing UL1741

Cables and Wires

  • 50 feet of 10 AWG Insulated PV wire is allocated per panel with wire shipped in 500 - 1000 foot long rolls, depending on number of solar panels requiring connection. This is done to ensure you get the right length wire for your set up. Instructions for attaching MC4 Connector end and the tool required are also provided.
  • 10 feet of black and 10 feet of red 6 AWG cable is provided for connections from combiner box to solar charge controller
  • 10 feet of black and 10 feet of red 6 AWG cable is provided for connections from solar charge controller to PDP
  • 10 feet of black x 2 and 10 feet of red x 2 - 4/0 AWG cable provided for connections from PDP to batteries
  • 10 feet of black and 10 feet of red 4/0 AWG cable provided for connections from PDP to Inverter
  • 10 cables @ 24 inches and 1/0 AWG provided for battery bank connections
  • 18 cables @ 18 inches and 2 AWG provided for battery bank connections

The TOTAL SOLAR 10,000w MEDIUM HOUSE KIT is a complete full solar energy house system. This system can power a medium sized house as is. EASILY EXPANDABLE! Simply add more panels, batteries, controllers for larger loads…  Also, for $150 it can be easily upgraded to a 12,000 watt Pure 48v sine wave inverter.
(Kit Does not include mounting system for solar panels. We can send you instructions on how to install system, and how to use low cost materials from your local hardware store to make a professional looking solar panel mount for your roof or ground.)

Call us for a free consultation on your power needs and installation concepts for your particular installation.)

Phone: 208-745-7100

Optional Extra

LCD Remote for more convenient ability to switch on Inverter.

• Battery Voltage
• AC input Voltage
• AC Output Voltage
• Frequency Monitoring
• Load Percentage Monitoring
• 60 foot connection cable

Dims: 5 1/2"L x 1 1/4"H x 4 1/4"W