Receive emails from Total Solar Technologies on product Sales, Promotions, New Products, and Solar News that could save you $$hundreds of dollars.
Your information will not be sold or abused. (1-2 emails a month)
How did you hear about us?
What are you most interested in?


SKU : TSI-4004 AGM

DIY Off-grid Solar House Kit - Medium House 4.7 Kw


Free Shipping within the entire Continental United States!!!

Comes complete with:
  • 1 - 10,000 watt 48 volt low frequency inverter with 110/220Vac Split Phase
  • 295+ watt polycrystalline solar panels for a total output of 4700 watts (note: panel counts is determined by panel wattage at time of order.) average 14 to 16 panels.
  • 24 - 120 Ah 12 volt sealed AGM batteries for 17.2 Kw of energy/8600Kw usable
  • 2 - 80 Amp 48 volt MPPT Multi stage smart solar charge controllers
  • 1 -Power Distribution box with 250 amp battery shut off breaker
  • 1 - 12 breaker Combiner box with 10 15 Amp breakers installed
  • 50 feet of solar panel cable per panel and all associated cables
      (see details in cable specifications below)      

*Easily expandable!!   just add more batteries, solar panels, charge controllers.
**Upgrade to a 12,000 watt inverter!



 Cash or check preferred.  Credit Cards purchases will be charged a processing fee of 5%.) 

Federal and State tax credits/deductions can pay for 40%-70% of the cost of the system.

This unique 48 volt system is simply superior in design and quality. It’s for those people who want a DIY complete solar system kit
they can put on their cabin, house, or trailer to become completely energy independent. Designed to have solar panels and
batteries easily added later for even more power.

Component features and specifications outlined below.


This inverter will output 120 or 220/230/240Vac, and it can output 50 or 60Hz via the SW4 switch on the DC side of the product. This means that this inverter works internationally and is operable with nearly any electrical system on the planet!

Built with a 48 volt DC input, this inverter performs with very little power loss. Users receive a notable increase in efficiency in large systems when compared to using 12 or 24 volts, which can be an attractive feature for sustainability lovers looking to live as efficiently as possible.

The most common use for this inverter is emergency backup power in homes, business and recreation locations. You’ll always be prepared for the next power outage with access to 10000 watts of continuous power and 30,000 watts of surge (for up to 20 seconds).

One of the most sought-after features this inverter has is the direct-connect terminal block, which allows users to surpass the 10000 watt capacity and harness its 300% surge power (up to 30,000 watts for 20 seconds as previously stated).

It’s also built to withstand reasonable heat and temperature fluctuations because of its over-temperature protection and dual thermally-controlled fans.  And it’s protected from humidity or dust and dirt by virtue of its marine-coated or “conformal-coated” boards. This inverter provides the reliability needed in any business or residential emergency backup power applications.


10000 watt low frequency inverter 110/220Vac Split Phase
30000 watt surge for 20 seconds -3x surge capability
Battery Priority Selector
Terminal Block
Marine Coated and Protected
Multi Stage Smart charger 100 Amp
remote panel available
10msec typical transfer time
selectable 25W power save mode (hibernation)
8 battery charger settings

Inverter Specifications

Output Specifications:
Continuous Output Power: 10000 Watts
Surge Rating: 30000 Watts (20 Seconds)
Output Waveform: Pure Sine/Same as input (Bypass Mode)
100-110-120Vac / 220-230-240Vac  
Nominal Efficiency: >88% (Peak)
Line Mode Efficiency: >95%
Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
Typical Transfer Time: 10ms (Max)
THD: < 10% DC

Input Specifications:

Nominal Input Voltage: 48.0Vdc
Low Battery Alarm: 42.0Vdc-44.0Vdc
Low battery Trip: 40.0Vdc-42.0Vdc
High Voltage Alarm: 64.0Vdc
Low battery Voltage Restart: 62.0Vdc
Idle Consumption: 150 Watts
Power Saver Mode Idle Consumption: 35 Watts

Charger Specifications
Output voltage: Depends on battery Type
Charger Rate: 100A

Unit Weight: 145.5 lbs.                         (66 kg)
Unit Size L x W x H: 23.3 x 16.3 x 7.9 inches     (592mm x 414mm x 201mm)
Shipping Weight: 190 lbs.                             (86.2 kg)
Shipping L x W x H: 30 x 21.25 x 15.25 inches   (762mm x 540mm x 387.4mm)


Battery specifications: Centennial CB12-120S (12V118.6Ah)

Cells Per Battery 6
Voltage Per Battery 12
Capacity 115Ah @ 10 hr-rate to 1.80V per cell
118.6Ah @ 20 hr-rate to 1.75V per cell
Weight Approx. 68.78 Lbs/31.2 Kg (Tolerance +/- 2 %)
Dimensions 12.99" (Length) x 6.77" (Width) x 9.51" (High)
330mm (Length) x 172mm (Width) x 241.5mm (High)
Max. Discharge Current 1150A (5 sec)
Internal Resistance Approx. 4.2 m
Operating Temperature Range Discharge: -4°F ~ 140°F / -20°C ~ 60°C
Charge:     32°F ~ 122°F / 0°C ~ 50°C
Storage:    -4°F ~ 140°F / -20°C ~ 60°C
Normal Operating Temperature Range  77°F ± 9°F / 25°C ± 5°C
Float charging Voltage  13.6 TO 13.8 VDC / battery Average at 77°F / 25°C
Recommended Maximum Charging
Equalization and Cycle Service 14.6 to 14.8 VDC/battery Average at 77°F / 25°C
Self Discharge (How quickly the stored energy will deplete when not in use) CB Valve Regulated Lead Acid (VRLA) batteries can be stored for more than 6 months at 77°F / 25°C. Self-discharge ratio less than 3% per month at 77°F / 25°C. Please charge batteries before using.
24 batteries with a capacity of 120 amp hr each.. These are no maintenance batteries. They don't leak liquid, gas nor do they need to be vented. The only requirement is that they need to be charged regularly in order to maintain cell integrity of the battery. Charging every three to four weeks is recommended. Failure to ensure a high enough voltage, through consistent charging, will result in cell degradation which causes irreparable damage to the battery.
Solar Panels
                         Solar Panels


Model No. Call For Current Panel offerings and specs


Power Warranty 25 Years of 80% Output Power
Product Warranty 10 Years


Solar Charge Controller
80 amp 48V MPPT Solar multi stage smart charge controller

  • MPPT Charge Controller 80 amp: 12V/24V/36V/48V Auto identifying system volt. Auto control system to limit the charging power & current go over the rated value.
  • 80A Solar Charge Controller MPPT, Max Input Solar Panel Power: 1000W/12V 2000W/24V 3000W/36V 4000W/48V. Max input Voltage: 150V. Real-time energy recording and statistical.
  • Solar Battery Charge Controller support for 4 type Battery charging: Lead-acid (Sealed, AGM, Gel, Flooded) and User (Not for Lithium). Battery temperature compensation function to ensure the controller’s life.
  • RS-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations.
  • Mppt Charge Regulator can be widely used for various applications, e.g. solar RV, household system and industrial field monitoring, etc. Quick Technical Support []
-12V / 24V /36V/48V DC Auto
-Rated charge current: 80A
-Max Input Power: 1000W-4000W (1000W/12V 2000W/24V 3000W/36V 4000W/48V)
-Max.PV open circuit voltage: 150VDC
-Battery type selection: lead-acid (Gel, Sealed) Flooded batteries and User
-Common-Negatived Ground Controller
-Battery Input: 8V~68V
-User programmable for battery types, load control etc.
-Temperature compens:-3mV/℃/2V(Default)
-LCD backlight time: 60S(Default)
-Recommended cable: 16mm2 (6Awg)

-High quality & low failure rate components of ST and Infineon to ensure the product’s life
-Advanced MPPT technology & ultra-fast tracking speed is up to 99.5%.
-Maximum DC/DC transfer efficiency is as high as 98.7%
-Auto control system to limit the charging power & current go over the rated value.
-Real-time energy recording and statistical function
-Battery temperature compensation function.
-Isolated RS-485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol
-Support up to 8 units in parallel to expand system

-PV Over Current/power
-PV Short Circuit
-PV Reverse Polarity
-Night Reverse Charging
-Battery Over Voltage
-Battery Over Discharge
-Battery Overheating
-Controller Overheating
-TVS High Voltage Transients

1 X 80A mppt charge controller
1 X MT50 remote meter
1 X RS485-150U communication cable
1 X Temperature Sensor
1 X English User manual


Xantrex XW Series Power Distribution Panel (PDP)

Dimensions (H x W x D) 30 x 16 x 8.3 in   (761 x 406 x 210 mm)
Shipping dimensions (H x W x D) 48 x 21 x 3.5 in   (1220 x 533 x 343 mm)
Shipping weight 67.2 Lbs.            (30.5 kg)
Included XW+ PDP enclosure with a field-reversible panel door, includes wall mount bracket, and XW+ Conduit Box
  (3) 60 A, 120/240 Vac, two-pole Square-D, type QOU, DIN-rail mounted AC breakers for AC input, bypass and
AC load (factory-installed), plus five AC breaker expansion positions
  One GJ 250A 160 Vdc, 3/8” stud DC breaker installed, plus two expansion positions
  Eight expansion positions for charge controller DC breakers (Note: XW supports up to 4 MPPT 80 600 or 4 MPPT 60 150 charge controllers)
  One ground terminal bus bar, one neutral terminal bus bar and one battery negative terminal bus bar
  One pair #4/0 AWG Arctic Ultraflex Blue™ battery cables (factory installed and labeled, ready to connect)
  #6 AWG Arctic Ultraflex Blue™ AC wiring (factory installed and labeled, ready to connect)

Combiner Box

Midnite Solar MNPV12 Combiner Box
Aluminum rainproof type 3R enclosure
Internal plastic injection molded dead front cover
Knock outs that accept waterproof strain reliefs, conduit or panel mount MC type connectors
Knock outs for lightning arrestors
Uses 150 VDC breakers
ETL listed to UL1741 for use in the US and Canada

Max VDC 150
Max # of Input Circuits 12
PV Source Circuits - Max OCPD Rating Amps 30
PV Source Circuits - OCPD CB 150V
PV Source Circuits - Wire Range AWG 14 - 6
PV Output Circuits - Max # of Output Circuits 2
PV Output Circuits - Max Cont. Current Amps 200
PV Output Circuits - Wire Range AWG 14 - 2/0
Approved Mounting Orientation 90° to 14°
Enclosure Type/Material 3R/Alum
Listing UL1741

Cables and Wires

  • 50 feet of 10 AWG Insulated PV wire is allocated per panel with wire shipped in 500 - 1000 foot long rolls, depending on number of solar panels requiring connection. This is done to ensure you get the right length wire for your set up. Instructions for attaching MC4 Connector end and the tool required are also provided.
  • 10 feet of black and 10 feet of red 6 AWG cable is provided for connections from combiner box to solar charge controller
  • 10 feet of black and 10 feet of red 6 AWG cable is provided for connections from solar charge controller to PDP
  • 10 feet of black x 2 and 10 feet of red x 2 - 4/0 AWG cable provided for connections from PDP to batteries
  • 10 feet of black and 10 feet of red 4/0 AWG cable provided for connections from PDP to Inverter
  • 10 cables @ 24 inches and 1/0 AWG provided for battery bank connections
  • 18 cables @ 18 inches and 2 AWG provided for battery bank connections

The TOTAL SOLAR 10,000w MEDIUM HOUSE KIT is a complete full solar energy house system. This system can power a medium sized house as is. EASILY EXPANDABLE! Simply add more panels, batteries, controllers for larger loads…  Also, for $150 it can be easily upgraded to a 12,000 watt Pure 48v sine wave inverter.
(Kit Does not include mounting system for solar panels. We can send you instructions on how to install system, and how to use low cost materials from your local hardware store to make a professional looking solar panel mount for your roof or ground.)

Call us for a free consultation on your power needs and installation concepts for your particular installation.)

Phone: 208-745-7100

Optional Extra

LCD Remote for more convenient ability to switch on Inverter.

• Battery Voltage
• AC input Voltage
• AC Output Voltage
• Frequency Monitoring
• Load Percentage Monitoring
• 60 foot connection cable

Dims: 5 1/2"L x 1 1/4"H x 4 1/4"W