slide
slide
slide
slide
slide
slide
 
 
emails
Receive emails from Total Solar Technologies on product Sales, Promotions, New Products, and Solar News that could save you $$hundreds of dollars.
Your information will not be sold or abused. (1-2 emails a month)
How did you hear about us?
What are you most interested in?

OFF-GRID READY DIY KIT - LARGE HOUSE 7.05KW

SKU : TSI-4006
$34,885.00

DIY Off-grid Solar House Kit - Large House 7.05 Kw

A COMPLETE LARGE SOLAR AND BATTERY BACKUP DIY KIT SYSTEM
FOR AN INCREDIBLE PRICE!  $34,885

FREE SHIPPING! (anywhere in continental US)

Comes complete with:
  • 1 - 12,000 watt 48 volt low frequency inverter with 110/220Vac Split Phase
  • 30 - 235 watt polycrystalline solar panels for a total output of 7050 watts
  • 32 - 120 Ah 12 volt sealed AGM batteries for 23 Kwh of energy
  • 3 - 80 Amp 48 volt MPPT Multi stage smart solar charge controllers
  • 1 - Xantrex Power Distribution box with 250 amp battery shut off breaker
  • 1 - 12 breaker Combiner box with 12 15 Amp breakers installed
  • 1 - 6 breaker Combiner box with 3 15 Amp breakers installed
  • 50 feet of solar panel cable per panel and all associated cables
     (see details in cable specifications below)       

*Easily expandable!!   just add more batteries, solar panels, charge controllers.

**ADD A 2000 WATT BACKUP WIND SYSTEM TO YOUR SOLAR SYSTEM FOR ONLY $4895!
Federal and State tax credits/deductions can pay for 50%-70% of the cost of the system. http://www.dsireusa.org/

This unique 48 volt system is simply superior in design and quality. It’s for those people who want a DIY complete solar system kit they can put on their cabin, house, or trailer to become completely energy independent. Designed to have solar panels and batteries easily added later for even more power.
 

Component features and specifications outlined below.

Inverter

Built with a 48 volt DC input, this inverter performs with very little power loss. Users receive a notable increase in efficiency in large systems when compared to using inverters that accept 12 or 24 volts. This can be an attractive feature for sustainability lovers looking to live as efficiently as possible.

The most common use for this inverter is emergency backup power for residences and business. You’ll always be prepared for the next power outage with access to 12,000 watts of continuous power and 36,000 watts of surge (for up to 20 seconds).

 One of the most sought-after features this inverter has is the direct-connect terminal block, which allows users to surpass the 12,000 watt capacity and harness its 300% surge power (up to 36,000 watts for 20 seconds as previously noted).
 

This inverter is also built to withstand reasonable heat and temperature fluctuations because of its over-temperature protection and dual thermally-controlled fans.  And it’s protected from humidity or airborne dust and dirt by virtue of its marine-coated (or “conformal-coated”) boards. This inverter provides the reliability needed in any business or residential emergency backup power applications.

This inverter is split-phase and will output 120 or 220/230/240Vac, and it can output 50 or 60Hz via the SW4 dipswitch on the DC side of the product. This means that this inverter works internationally and is operable with nearly any electrical system on the planet!
 

Features:
 

12000 watt low frequency inverter 110/220Vac Split Phase
36000 watt surge for 20 seconds -3x surge capability
Battery Priority Selector
Terminal Block
Marine Coated and Protected
Multi Stage Smart charger 120 Amp
remote panel available
10msec typical transfer time
selectable 25W power save mode (hibernation)
8 battery charger settings

Inverter Specifications

Output Specifications:
Continuous Output Power: 12000 Watts
Surge Rating: 36000 Watts (20 Seconds)
Output Waveform: Pure Sine/Same as input (Bypass Mode)
100-110-120Vac / 220-230-240Vac  
Nominal Efficiency: >88% (Peak)
Line Mode Efficiency: >95%
Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
Typical Transfer Time: 10ms (Max)
THD: < 10% DC
 

Input Specifications:

Nominal Input Voltage: 48.0Vdc
Low Battery Alarm: 42.0Vdc-44.0Vdc
Low battery Trip: 40.0Vdc-42.0Vdc
High Voltage Alarm: 64.0Vdc
Low battery Voltage Restart: 62.0Vdc
Idle Consumption: 200 Watts
Power Saver Mode Idle Consumption: 40 Watts

Charger Specifications
 
Output voltage: Depends on battery Type
Charger Rate: 120A

Dimensions 
 
Unit Weight: 174 lbs.                         (78.93 kg)
Unit Size L x W x H: 23.3 x 16.3 x 7.9 inches     (592mm x 414mm x 201mm)
Shipping Weight: 200 lbs.                             (90.72 kg)
Shipping L x W x H: 30 x 21.25 x 15.25 inches   (762mm x 540mm x 387.4mm)
 
Batteries

Battery specifications: Centennial CB12-120S (12V118.6Ah)

Cells Per Battery 6
Voltage Per Battery 12
Capacity 115Ah @ 10 hr-rate to 1.80V per cell
118.6Ah @ 20 hr-rate to 1.75V per cell
Weight Approx. 68.78 Lbs/31.2 Kg (Tolerance +/- 2 %)
Dimensions 12.99" (Length) x 6.77" (Width) x 9.51" (High)
330mm (Length) x 172mm (Width) x 241.5mm (High)
Max. Discharge Current 1150A (5 sec)
Internal Resistance Approx. 4.2 m
Operating Temperature Range Discharge: -4°F ~ 140°F / -20°C ~ 60°C
Charge:     32°F ~ 122°F / 0°C ~ 50°C
Storage:    -4°F ~ 140°F / -20°C ~ 60°C
Normal Operating Temperature Range  77°F ± 9°F / 25°C ± 5°C
Float charging Voltage  13.6 TO 13.8 VDC / battery Average at 77°F / 25°C
Recommended Maximum Charging
Current
 34.5A
Equalization and Cycle Service 14.6 to 14.8 VDC/battery Average at 77°F / 25°C
Self Discharge (How quickly the stored energy will deplete when not in use) CB Valve Regulated Lead Acid (VRLA) batteries can be stored for more than 6 months at 77°F / 25°C. Self-discharge ratio less than 3% per month at 77°F / 25°C. Please charge batteries before using.
 
32 batteries with a capacity of 120 amp hr each.. These are no maintenance batteries. They don't leak liquid, gas nor do they need to be vented. The only requirement is that they need to be charged regularly in order to maintain cell integrity of the battery. Charging every three to four weeks is recommended. Failure to ensure a high enough voltage, through consistent charging, will result in cell degradation which causes irreparable damage to the battery.
Solar Panels
                                                                                 

Specifications

Model No. CS6P-235PX
 

WARRANTY

Power Warranty 25 Years of 80% Output Power
Product Warranty 10 Years
 

ELECTRICAL DATA AT STC (Standard Test Conditions)

Maximum Power (Pmax)  235 W
Voltage at Maximum Power (Vmpp)  29.8 V
Current at Maximum Power (Impp)  7.90 A
Open Circuit Voltage (Voc)  36.9 V
Short Circuit Current (Isc)  8.46 A
Panel Efficiency  14.61 %
Power Tolerance (Positive)  0 ~ + 5 W
*Standard Test Conditions (STC): air mass AM 1.5, irradiance 1000W/m2, cell temperature 25°C
 

ELECTRICAL DATA AT NOCT (Nominal Operating Cell Temperature)

Maximum Power (Pmax)  170 W
Voltage at Maximum Power (Vmpp)  27.2 V
Current at Maximum Power (Impp)  6.27 A
Open Circuit Voltage (Voc)  33.9 V
Short Circuit Current (Isc)  6.86 A
Temperature  113 °F ± 3.6 °F / 45 ± 2 °C
Nominal Operating Cell Temperature (NOCT): 800W/m2, AM 1.5, windspeed 1m/s,ambient temperature 20°C
 

THERMAL RATINGS

Operating Temperature Range  -40 °F ~ 185 °F / -40 ~ 85 °C
Temperature Coefficient of Pmax  -0.45 %/°C
Temperature Coefficient of Voc  -0.33 %/°C
Temperature Coefficient of Isc  0.06 %/°C
 

MAXIMUM RATINGS

Maximum System Voltage  600 V
Series Fuse Rating  15 A
 

MATERIAL DATA

Panel Dimension (H/W/D)  64 1/2" x 38 5/8" x 1 9/16"  (1642 x 994 x 40mm) 
Weight   44.1 lbs                            (20 kg)                  
Cell Type  Polycrystalline
Cell Size  6 1/8" x 6 1/8"                    (156 ×156mm)        
Cell Number  60
Glass Type  Tempered, Anti-reflection Coating
Glass Thickness  3.2 mm
Encapsulant Type  EVA
Back Cover Type  TPT
Frame Type  Anodized Aluminium Alloy
Junction Box Diodes  3
Junction Box Protection Class  IP 65
Connector Type  MC4
Cable Crosssection  4 mm2
Cable Length  39.37"                                 (1000mm)
 
Solar Charge Controller
80 amp 48V MPPT Solar multi stage smart charge controller
      
Specifications
Nominal Battery Voltages 12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)
Maximum Output Current 80 amps @ 104°F (40°C) with adjustable current limit
 
PV Open Circuit Voltage (VOC) 150 VDC absolute maximum coldest conditions /    145 VDC start-up and operating maximum
Standby Power Consumption Less than 1 Watt typical
Power Conversion Efficiency 97.5% @ 60 Amps in, at 48 VDC System voltage - Typical
Charging Regulation Five stages: Bulk, Absorption, Float, Silent and Equalization
Voltage Regulation Set Points 10 to 80 VDC; user adjustable with password protection
Equalization Charging Programmable Voltage Setpoint and Duration - Automatic Termination when completed
Battery Temperature Compensation Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell
Voltage Step-Down Capability Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input
Programmable Auxilliary Control Output 12 VDC output signal which can be programmed for different control applications (Maximum of 0.2 amps DC)
Status Display 3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total
Remote Display and Controller (Optional) Mate or Mate2 with RS232 Serial Communications Port
Network Cabelling Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
Data Logging Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float, Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production
Positive Ground Applications Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 cannot be used for use in positive ground applications)
Operating Temperature Range Minimum -40°F to maximum 140° F (Power capacity of the controller is automatically de-rated when operated above 104° F)
Environmental Rating Indoor Type 1
Conduit Knockouts One 1" (35mm)on the back; One 1" (35mm) on the left side;Two 1" (35mm) on the bottom
Weight - Unit 12.35 Lbs.                 (5.6 kg)
Weight - Shipping 13.89 Lbs.                 (6.3 kg)
Dimensions - Unit 17.33" x 5.52" x 3.94" (44 x 14 x 10 cm)
Dimensions - Shipping 20.1" x 9.45" x 8.47"   (51 x 24 x 21.5 cm)
Options Remote Temperature Sensor (RTS), HUB 4,HUB 10, MATE, MATE 2
Menu Languages English & Spanish
 

POWER DISTRIBUTION BOX

Xantrex XW Series Power Distribution Panel (PDP)

                                                               
 
Dimensions (H x W x D) 30 x 16 x 8.3 in   (761 x 406 x 210 mm)
Shipping dimensions (H x W x D) 48 x 21 x 3.5 in   (1220 x 533 x 343 mm)
Shipping weight 67.2 Lbs.            (30.5 kg)
Included XW+ PDP enclosure with a field-reversible panel door, includes wall mount bracket, and XW+ Conduit Box
  (3) 60 A, 120/240 Vac, two-pole Square-D, type QOU, DIN-rail mounted AC breakers for AC input, bypass and
AC load (factory-installed), plus five AC breaker expansion positions
  One GJ 250A 160 Vdc, 3/8” stud DC breaker installed, plus two expansion positions
  Eight expansion positions for charge controller DC breakers (Note: XW supports up to 4 MPPT 80 600 or 4 MPPT 60 150 charge controllers)
  One ground terminal bus bar, one neutral terminal bus bar and one battery negative terminal bus bar
  One pair #4/0 AWG Arctic Ultraflex Blue™ battery cables (factory installed and labeled, ready to connect)
  #6 AWG Arctic Ultraflex Blue™ AC wiring (factory installed and labeled, ready to connect)
 

Combiner Boxes

 
Midnite Solar MNPV6 Combiner Box
 
Aluminum rainproof type 3R enclosure
Internal plastic injection molded dead front cover
Knock outs that accept waterproof strain reliefs, conduit or panel mount MC type connectors
Knock outs for lightning arrestors
Uses 150 VDC breakers
ETL listed to UL1741 for use in the US and Canada
 

Specifications
 
Max VDC 150
Max # of Input Circuits 6
PV Source Circuits - Max OCPD Rating Amps 20
PV Source Circuits - OCPD CB 150V
PV Source Circuits - Wire Range AWG 14 - 6
PV Output Circuits - Max # of Output Circuits 2
PV Output Circuits - Max Cont. Current Amps 120
PV Output Circuits - Wire Range AWG 14 - 1/0
Approved Mounting Orientation 90° to 14°
 
Enclosure Type/Material 3R/Alum
Listing UL1741

 Midnite Solar MNPV12 Combiner Box


 
Aluminum rainproof type 3R enclosure
Internal plastic injection molded dead front cover
Knock outs that accept waterproof strain reliefs, conduit or panel mount MC type connectors
Knock outs for lightning arrestors
Uses 150 VDC breakers
ETL listed to UL1741 for use in the US and Canada
 

Specifications
 
Max VDC 150
Max # of Input Circuits 12
PV Source Circuits - Max OCPD Rating Amps 30
PV Source Circuits - OCPD CB 150V
PV Source Circuits - Wire Range AWG 14 - 6
PV Output Circuits - Max # of Output Circuits 2
PV Output Circuits - Max Cont. Current Amps 200
PV Output Circuits - Wire Range AWG 14 - 2/0
Approved Mounting Orientation 90° to 14°
 
Enclosure Type/Material 3R/Alum
Listing UL1741
 
Cables and Wires
  • 50 feet of 10 AWG Insulated PV wire is allocated per panel with wire shipped in 500 - 1000 foot long rolls, depending on number of solar panels requiring connection. This is done to ensure you get the right length wire for your set up. Instructions for attaching MC4 Connector end and the tool required are also provided.
  • 10 feet of black and 10 feet of red 6 AWG cable is provided for connections from combiner box to solar charge controller
  • 10 feet of black and 10 feet of red 6 AWG cable is provided for connections from solar charge controller to PDP
  • 10 feet of black x 2 and 10 feet of red x 2 4/0 AWG cable provided for connections from PDP to batteries
  • 10 feet of black x 2 and 10 feet of red x 2 4/0 AWG cable provided for connections from PDP to Inverter
  • 14 cables @ 24 inches and 1/0 AWG provided for battery bank connections
  • 24 cables @ 18 inches and 2 AWG provided for battery bank connections
 

The TOTAL SOLAR 12,000w LARGE HOUSE KIT is a complete full solar energy house system. This system can power a large sized house as is. EASILY EXPANDABLE! Simply add more panels, batteries, controllers for larger loads.
(Kit does not include mounting system for solar panels. We can send you instructions on how to install the system, and how to use low cost materials from your local hardware store to make a professional looking solar panel mount for your roof or ground. Call us for a free consultation on your power needs and installation concepts for your particular installation.)
 


Call us for a free consultation on your power needs and installation concepts for your particular installation.)

Phone: 208-745-7100
Email: support@totalsolar.us


Optional Extra

LCD Remote for more convenient ability to switch on Inverter.

Features:
• Battery Voltage
• AC input Voltage
• AC Output Voltage
• Frequency Monitoring
• Load Percentage Monitoring
• 60 foot connection cable

Dims: 5 1/2"L x 1 1/4"H x 4 1/4"W

$34,885.00
0.07