DIY House Systems
Receive emails from
Total Solar Technologies
on product Sales, Promotions, New Products, and Solar News that could save you $$hundreds of dollars.
Your information will not be sold or abused. (1-2 emails a month)
How did you hear about us?
What are you most interested in?
DIY House Kits
Portable Solar Units
Join Mailing List
X CLOSE X
<< RETURN TO THE STORE
Sorry, no canvas available
12,000 WATT INVERTER UPGRADE (FROM 10K)
SKU : TST-4000NVRTUPG-12K
Add to Cart
12,000 Watt Inverter Upgrade
Upgrade your DIY Solar House Kit Inverter from a
t pure sine wave 48V inverter to a
pure sine wave 48V inverter.
Built with a 48 volt DC input, this inverter performs with very little power loss. Users receive a notable increase in efficiency in large systems when compared to using inverters that accept 12 or 24 volts. This can be an attractive feature for sustainability lovers looking to live as efficiently as possible.
The most common use for this inverter is emergency backup power for residences and business. You’ll always be prepared for the next power outage with access to 12,000 watts of continuous power and 36,000 watts of surge (for up to 20 seconds).
This is one of the most sought-after features this inverter has as its direct-connect terminal block is what allows users to surpass the 12,000 watt capacity and harness its 300% surge power (up to 36,000 watts for 20 seconds as previously noted).
This inverter is also built to withstand reasonable heat and temperature fluctuations because of its over-temperature protection and dual thermally-controlled fans. And it’s protected from humidity or airborne dust and dirt by virtue of its marine-coated (or “conformal-coated”) boards. This inverter provides the reliability needed in any business or residential emergency backup power applications.
This inverter is split-phase and will output 120 or 220/230/240Vac, and it can output 50 or 60Hz via the SW4 dipswitch on the DC side of the product. This means that this inverter works internationally and is operable with nearly any electrical system on the planet!
12000 watt low frequency inverter 110/220Vac Split Phase
36000 watt surge for 20 seconds -3x surge capability
Battery Priority Selector
Marine Coated and Protected
Multi Stage Smart charger 120 Amp
remote panel available
10msec typical transfer time
selectable 25W power save mode (hibernation)
8 battery charger settings
Inverter Output Specifications
Continuous Output Power: 12000 Watts
Surge Rating: 36000 Watts (20 Seconds)
Output Waveform: Pure Sine/Same as input (Bypass Mode)
100-110-120Vac / 220-230-240Vac
Nominal Efficiency: >88% (Peak)
Line Mode Efficiency: >95%
Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
Typical Transfer Time: 10ms (Max)
THD: < 10% DC
Inverter Input Specifications
Nominal Input Voltage: 48.0Vdc
Low Battery Alarm: 42.0Vdc-44.0Vdc
Low battery Trip: 40.0Vdc-42.0Vdc
High Voltage Alarm: 64.0Vdc
Low battery Voltage Restart: 62.0Vdc
Idle Consumption: 200 Watts
Power Saver Mode Idle Consumption: 40 Watts
Output voltage: Depends on battery Type
Charger Rate: 120A
Unit Weight: 174 lbs. / 79 Kg
Unit Size L x W x H: 23.3 x 16.3 x 7.9 inches / 592mm x 414mm x 201mm
Shipping Weight: 200 lbs. / 91 Kg
Shipping L x W x H 30 x 21.25 x 15.25 inches / 762mm x 540mm x 387.35mm
(only available as part of a DIY house kit purchase)
Add to Cart
©2019 Total Solar Technologies. All rights reserved.